BLDC MOTOR DRIVER(SRM2405)

1, INTRODUCTION
This information manual provides the product specifications, wiring diagram, for the SRM series BLDC motor driver.
The SRM series BLDC motor driver adopt DC input power and integrated motor control ICS, according to control inquire, the current detect and speed detect circuit adopt PID control, increase the driver' stability and assure the motor can supply more torque in low speed.
The SRM series BLDC motor driver can supply 8A continuous current and 15 amps peak current at 48VDC for total of 480 watts of continuous power. The SRM series driver is a current source type PWM driver.

2, ELECTRICAL CAUTIONS
Make sure that all voltages and tests are made with battery powered or electrically isolated instruments.

3, SPECIFICATION
3.1 General Specification
Item Driver
Insulation Resistance 100Mohms or more when 500VDC is applied between the windings and the frame
Dielectric Strength Sufficient to withstand 0.5KVAC at 50Hz applied between the PG and power supply input terminal for 1 minute.
Operating Ambient Temperature 0~ +50 deg. C, nonfreezing
Environment humidity 85% maximum, non-condensing
Conditions Atmosphere No corrosive gases or dust
Degree of Protection -