Automatic Shot Blaster Machine For Gears Surface Descaling / Cleaning

Widely Used Automatic Rubber Belt Crawler Type Shot Blaster Machine

Rubber Belt Crawler Type?Shot Blaster Machine Description

Rubber tracked type shot blasting machine is a small shot blasting cleaning equipment, mainly by the room the shotblast cleaning, shot blasting machine assembly, hoisting machine, separator, shot blasting machine electrical system and other accessories.
It is suitable for small and medium sized castings, forgings, stampings, the gear, spring and other parts of deoxidization, rust removal, remove scale and surface strengthening, are especially suitable for the cleaning of parts and reinforcement.

Structure of Rubber Belt Crawler Type Shot Blaster Machine

Rubber Belt Crawler Type Shot Blaster Machine Advantage

1. Special thin and small workpieces can be also processed.

Shot blasting room with unique structure can clean and process the common casting and forging workpieces.Even very small and thin pieces can be handled without any damage.

2. Input and discharge simply and accurately.

For the smooth movement,the workpieces will not be hurted.It can be moderately and completely inputted and discharged, easy to be operated.

3. Simple maintenance

Simple structures of drum and the body can reduce damage to this machine,so that can save time and cost for maintenance.

Rubber Belt Crawler Type Shot Blaster Machine?Operation

1. Add the shots?and load in the workpieces, then close the door.

2. Start the fan of the dust collector.

3. Start elevator, blasting wheel and shot supply valve in turn.?

4. After finishing cleaning process, stop shot supply valve, blasting wheel elevator and dust collector fan in turn.

5. After the machine stop completely, open the workpiece feeding door, unload the workpieces.

6. Emergency stop switch?is for emergency situation. The whole machine will stop immediately after pressing the button.

7. Dust collector should be stop timely after finish all the duty.

Range of Application

1. Desanding and decoring of iron, bronze and light metal castings

2. Descaling of forged metal parts, and heat treated components

3. Deburring of metallic and non-metallic parts

4. Forced but gentle turning and tumbling of the parts for all-round shot impingement

5. Targeted high performance shot blasting for specific applications

6. Continuous and thorough shot removal

Notice and Maintenence

1. Regularly cleaning the?collect box of the dust collector to protect the dust removing pipe from blacking.

2. Cleaning the bottom of the blasting room and the separator frequently.

3. Often?cleaning the shots around to avoid slipping?and falling.

4. Regularly check the rubber belt and belt of the elevator to avoid deviating.

5.?Never to open the workpiece feeding door unless the machine stop completely to avoid accident.

6. Frequently check the end plate of the blasting chamber and the wearable parts of the blasting wheel. To change the badly worn parts in time.

7. The machine must be lubricated periodical to guarantee flexible rotating.

8. regularly check and clean the drive section of the machine, change the badly worn parts.

Our service:

1. Reply your inquiry in 24 hours.

2. Experienced staffs answer all your questions in time.

3. Customized design is available.

4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.

5.?Special discount and protection of sales are provided to our distributor.

6.?Professional factory: We are manufacturer, specializing in p