Professional Auto Blasting Machine , Tumbling Barrels Shot Blaster Machine For Forging Industry

Tumbling Barrels Type Shot Blasting Machine for Precision Forging Industry

Tumbling Barrels Type Shot Blasting Machine?Description

Rubber Belt blasting machines are equipped with a perforated rubber belt over which slide work pieces, while thoroughly cleaned. Version with a rubber belt is used to prevent breakage and other damage of sensitive work pieces. The abrasive flows through the holes in the belt into a collecting hopper and is poured into a storage bunker via the abrasive cleaner by means of an elevator. The newly developed abrasive separators ensure that the abrasive receives optimum cleaning and a high cleaning speed can be achieved. Innovative pressure washers provide optimum sand blasting work pieces and maintain a high productivity process.?

Structure of Tumbling?Barrels Type Shot Blasting Machine

Tumbling Barrels Type Shot Blasting Machine?Advantage

1. Compact design, simple operating principle
2. Forced but gentle turning and tumbling of the parts for all-round shot impingement
3. Targeted high performance shot blasting for specific applications
4. Continuous and thorough shot removal

Tumbling Barrels Type Shot Blasting Machine?Operation

1. Add the shots?and load in the workpieces, then close the door.

2. Start the fan of the dust collector.

3. Start elevator, blasting wheel and shot supply valve in turn.?

4. After finishing cleaning process, stop shot supply valve, blasting wheel elevator and dust collector fan in turn.

5. After the machine stop completely, open the workpiece feeding door, unload the workpieces.

6. Emergency stop switch?is for emergency situation. The whole machine will stop immediately after pressing the button.

7. Dust collector should be stop timely after finish all the duty.

Range of Application

1. Descaling of forged or heat treated parts
2. Desanding of ferrous and non-ferrous metal castings
3. Deburring of metallic and non-metallic parts
4. Shot peening (specific versions with 2 bidirectional wheels and automatic control cage adjustment)

Optimised shot blast effect

During shot blasting, the workpieces, regardless of size and shape, are evenly and continuously tumbled. This is necessary for the effective and uniform treatment of all surfaces.
During tumbling, the workpieces continually undergo shot removal, enabling workpiece interiors and cavities to be perfectly cleaned. For the complete removal of all shot, the final tumbling time that follows the shot blast sequence can be regulated to suit the type of workpieces being blast cleaned. The tightly sealed, leak-proof blast chamber minimises shot consumption.

Notice and Maintenence

1. Regularly cleaning the?collect box of the dust collector to protect the dust removing pipe from blacking.

2. Cleaning the bottom of the blasting room and the separator frequently.

3. Often?cleaning the shots around to avoid slipping?and falling.

4. Regularly check the rubber belt and belt of the elevator to avoid deviating.

5.?Never to open the workpiece feeding door unless the machine stop completely to avoid accident.

6. Frequently check the end plate of the blasting chamber and the wearable parts of the blasting wheel. To change the badly worn parts in time.

7. The machine must be lubricated periodical to guarantee flexible rotating.

8. regularly check and clean the drive section of the machine, change the badly worn parts.

Our service:

1. Reply your inquiry in 24 hours.

2. Experienced staffs answer all your questions in time.

3. Customized design is available.

4. Exclusive and unique solution can be prov