Home > Products > Automatic Barrier Gate > 0.6S Highway Intelligent Automatic Boom Barrier Gate CE Approved
0.6S Highway Intelligent Automatic Boom Barrier Gate CE Approved
- T/T L/C D/P D/A
- 7 days
You May Like
-
Parking System 4S Automatic Barrier Gate With Loop Detector / Photocell
-
CE / SGS Approved Automatic Barrier Gate 5 Million Operation Times
-
OEM Manual Realese Automatic Parking Boom Barrier Gate For Airport / Hotel
-
Automatic Toll Parking System Barrier Gate Operator Straight Arm
-
Black Highway Automatic Barrier Gate For Vehicle Access Control CE
-
European Level Design Car Park Barrier Gate With Remote Control Heavy Duty
Product Details
| Brand Name | WONSUN | Place of Origin | China | |
| Model Number | DZTP-133-A |
Product Description
Certification:CE, ISO, SGS
0.6S Highway Intelligent Automatic Boom Barrier Gate CE Approved
Work with WONSUN
1.One year's free servicing is supplied( not including the arm)
2. Lifetiom charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper voltae.
3. The surfaces of the system destroyed by wrong installation our use.
4. Broken by natural disaster.
5. Overdue
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if there is any.
The explaining ?authority of this product instruction and service article belong to the production factory.
Model Selection and Differences
Specifications
|
Model |
WST1211 |
|
Working Temperature |
-40℃～+75℃ |
|
Voltage |
220V±10%, 110V±10%, 50/60HZ |
|
Rated power |
80W |
|
Relative humidity |
≤90% |
|
Remote control distance |
≥30m |
|
Net weight |
48kgs |
|
Speed |
1S,1.8S,3S, 6S |
|
Max boom length |
6 meters |
|
Motor Rotational speed |
1400rmp |
|
Protection Degree |
IP44 |
?
Communication with customers
?
1)?????Q:?Connected power and press open/close button but traffic barrier gate no action?
|
A |
Reason |
Solution |
|
1 |
Fuse blown |
Check fuse and power in controller |
|
2 |
Battery?of remote control powered off |
Change a new one |
|
3 |
External protection circuit break or at protecting status |
Open the barrier door and click OPEN/CLOSE button on control box |
|
4 |
Same frequency interference |
Check photocell and loop detector |
?
2) Q:Connected power and press open/close button,traffic barrier gate will move but even when it is at right position, the motor still running and not stop?
?
|
A |
Reason |
Solution |
|
1 |
Limit switch |
Adjust the horizontal/vertical limit switch to correct position |
|
2 |
Main controller failure |
Change a new one |
?
3)???Q:?Motor running but traffic barrier gate arm no action?
?
|
A |
Reason |
Solution |
|
1 |
Barrier arm at 45° position where is hard to move |
Unlock clutch and manually rotate arm to horizontal or vertical position then try again |
|
2 |
Tension of balancing spring not suitable |
Adjust spring exactly |
|
3 |
Low working voltage |
Check the voltage and power |
?
4)??Q:?When opening/closing,traffic barrier gate arm cannot reach right position (90° vertical & 180° horizontal)?
?
