Manual Vehicle Barrier Gate with RS485 Communication Module Straight Boom

?Manual Vehicle Barrier Gate with RS485 Communication Module Straight Boom

?
Quick?Detail:
?
Name: Vehicle barrier gate
Speed:6?seconds
Feature:Straight?boom
Installation director: Both left install and right install
Max length of boom: 6m

Model Selection and Differences

?
?
?
?
?
Functions & Features

A: Barrier gate controllling:
There are three buttons to control the barrier gate conveniently when the barrier gate sets well.
If the boom can not fall down or rise up to the right position, or rises up automatically after reaching the horizontal position, please check whether the abnormal situation is caused by loop detector or not.
If the abnormal situation mentioned above is not causeed by loop detector, please check the"Gate Type Selection " setting.(Note: the barrier gate speed has been fixed. and? this "Gate Type Selection" is just for controller adjustment to keep its' working speed accord? with the barrier gate speed) The " Gate Type Selection has been well set before leaving our factory, but user can adjust it if needed.
B: Boom? backtrack function:
The boom will rise up if it comes across obstacles when falling. And it will stop if it hits something when rising.
C: Infrared photocell function:
If the infrared signal is cut off when the boom is falling, the boom will rise up automatically.

?Specifications

?
?
With WONSUN, your job gets easier.

Because we don’t just create “good” products, that work pretty well.Our thinking is beyond the short-term.We are conceiving, designing and creating high-tech solutions that are as advanced and effective as they are reliable and long-lasting.
Because we want to provide tools and services that truly are innovative,that will improve your performance and enhance your skills;and that will make your business easier, increasing its profitability.
Because our focus is on Quality with a capital Q.We just won’t settle for less.
?
Communication with customers
?
1. There is no reaction on the motor when the user changes a control board.
a. Please check the capacitance is correctly fixed or not.
b. Please check the sensor is right inserted or not.
2.? If the user changes a new control board and the boom is abnormal when rising and falling.
a. Please adjust the" Gate Type Selection"( Refer to the control board)