Wire Machine

1.The window screening machine

The machine fills the vacancy in metal wire screens weaving equipment in China and can replace the import ones. The metal wire screens woven with the machines are widely used for filtering of liquid or petrochemical industry, machinery, military industry, space flight and etc.

Main Characteristics:
1. Adaptability to metal wires; adapt to various imported and domestic metal wires.
2. Large adjust range: This metal wire screen weaving machine can produce not only square opening wire mesh ranging from 14-500 mesh but also special kinds up to 2800 mesh, such as plain weaving, twilled weaving and taper contrast high density screen weaving, etc. Wire mesh products woven with the machine have advantage over products woven with other machines.
3. The machine adopts technique of shuttless and straightaway weft leading, automatic warp feeding and winding. Sheddings are small and surfaces of woven screens are smooth. There are no bright spots, bright traces or other defects on the fine screens. The machine can make high-grade metal wire screens that are up to or above the second grade in standard of GB5330-42002.
4. Lower center of the gravity, good stability, low noise and energy consumption, high efficiency.
5. Rational design, simple construction, easy to operate and maintain.

Metal Wire Weaving Machine

Main Parameter:
1. Width of fabric: Max. 1300mm
2. Thickness of fabric: 14-500 mesh(square holes gauze)-2800 mesh(special gauze)
3. Rotating speed of crank shaft: 65-90 stepless speed regulation
4. Crank shaft rotating speed: 72rpm
5. Power of motor: 2.2KW; Rotating speed of motor: 1450rpm
6. Total weight: 2700kg
7. Total measurement: 2600x280x1200mm

2.Barbed wire machine

CS-A Barbed Wire Machine is designed to produce screens with double (or single). Stranded barbed steel wire, thermo-plated with zinc. The machine is of horizontal design, consisting of two parts, assembled together at the middle. It is safe and reliable in operation, capable of turning out high quality products with consistency.             Gauge of Strand and Barb in B.W.G. Approximate Length per Kilo in Meter Barbs spacing 3" Barbs spacing 4" Barbs spacing 5" Barbs spacing 6" 12x12 6.0617 6.7590 7.2700 7.6376 12x14 7.3335 7.9051 8.3015 8.5741 12-1/2x12-1/2 6.9223 7.7190 8.3022 8.7221 12-1/2x14 8.1096 8.814 9.2242 9.5620 13x13 7.9808 8.899 9.5721 10.7146 13x14 8.8448 9.6899 10.2923 10.7146 13-1/2x14 9.6079 10.6134 11.4705 11.8553 14x14 10.4569 11.6590 12.5423 13.1752 14-1/2x14-1/2 11.9875 13.3671 14.3781 15.1034 15x15 13.8927 15.4942 16.6666 17.5070 15-1/2x15-1/2 15.3491 17.1144 18.4060 19.3386
Specification
Diameter, screen wire 2.5-3mm Material, screen wire & barbed wire Low carbon steel wire, thermo-plated with zinc Diameter, wire for barbs 2-2.5mm total weight 1500 kgs Barb pitch spacing 3,4,5,6in power of motor 3 kw PVC-plated - 3.Expanded wire mesh machine The machines,are used for punching shear the cold crimped engine bed with the thickness of 1.2-2.5mm,the width of 2000mm,material sterngth of 450N/mm2,the specifications of punching shear are surveyed by the bit of TB5-20 mesh grid plate:if the TB,TL are changed,the punching shear knife is also changed;TB,TL are increased,the punching shear strength is reduced,TB,Tlare reduced,the punching shear strength is increased.in order not to danage components for the excess load.the nominal tonnage is 63T.if TB,Tlare reduced,the punching shear strength surpasses the nominal tonnage,you can reduce the material thickness and width. The machine are used for punching all kinds of expand plate mesh in construction,common hardware and door,machine protecting etc.   Feed machines passes the chain link by the main engine directcy,the movement accurate is reliable.   The times of feed mechanism punching shear is started from 0,it can shear in free scope

4.Drawing wire machine

Big water tank:2.0mm-0.5mm