Steel Grating SG02

Steel Grating

Steel grating is made by welding with flat steel and bars with certain distances.it goes through cutting,opening,edging and other process.
Features:
Durability:before leaving factory, it has undergone corrosion prevention treatment of hot-dip galvanizing; therefore, it has strong capability in bearing impact and stress.
Modern style: beautiful figure, canonical design, good ventilation and lighting; people will enjoy its whole, smooth and modern style.
Portable structure:material saving, light structure and easy to be hoisted for installation.
Prevent dirty objects accumulation: rain water, ice snow and dust.
Use: It is widely used in the platform,corridor,bridge,well covers,stairs,fencing for petroleum,chemical,power plant,wast treatment plant,civil engineering projects and environmental projects

1.Roof steel grating

1.Material:Standard Q195,Q235 low Carbon Steel Wire ;Welded pipe,etc.
2. Wire Diameter Scale :(after surface treatment)2.5mm—6.0mm,(Note:the common spec: 3.0mm,3.2mm,3.5mm,4.0mm,4.8mm;
3. Mesh Size:(common)75mm*150mm,50mm*200mm,80mm*160mm
4.Frame Sire: 20mm*30mm,15mm*20mm,20mm*20mm,30mm*50mm
5.Post Sire:(two kinds)
A:Circular Pipe Post:
Diameter: 48mm,60mm,75mm
Thickness: 0.8mm,1.0mm,1.2mm,1.5mm,2.0mm
B:Square Pipe Post:
Diameter: 50mm*50mm,60mm*60mm,60mm*80m
Thickness:0.8mm,1.0mm,1.2mm,1.5mm,2.0mm
6.Heigh and Width of the Fence(common):1800mm*3000mm
7.Center Distnce Between Post:2.5—2.0m

Surface Taeatment :Galvanized and PE coated.Glvanized include Hot Galvanized and,PE coated include Powder-spirt coatedand PVCcoated.
Features:Corrosion resistant,anti-aging,heat-resistant,weather proof,etc,Form of corrosion resistance include electro galvanizing ,heat galvanizing and plastic coating.The multi-color plastic coating offers good corrosion resistance and decorative effects.
Use:Prevention for road,railway,airport,residence district,seaport,garden,feeding and husbandry.

2.Compound steel grating

Compound Steel Grating is the product composed of Steel Grating with a given capability of transverse span and checkered steel plate with sealed surface. It can be made of any Steel Grating of any model and “I” checkered steel plate of any thickness. G323/40/100 Steel Grating is usually used as the bottom plate; checkered steel plate usually adopts plate of3mm, 4mm, 5mm, or 6mm.

3.Shaft cover

It is fabricated by Steel Grating, which has modern, simple and beautiful figure, high strength to prevent breaking. Hollow-out rate reaches 90%, which is several times more than that of cement and cast iron cover. Good water drainage capability can allow grasses under the tree fully enjoy sun and air. Hot-dip galvanizing surface can permanently prevent corrosion. Necessary device is designed to simplify installation and dismantling. It is widely used in municipal roads, gardens, plaza, commercial residential area, etc

4.Ladder rung

 
The ladder rung can be fabricated with Steel Grating of any model; its dimension can be adjusted according to requirement. From economic aspect, we advise you adopt our recommended length and width, front guard plate and side plate.
Recommended ladder rung width(based on 5mmthick flat steel )