CE Tire Waste Rubber Crusher Machine Lower Energy Consumption

CE Tire Waste Rubber Crusher Machine Lower Energy Consumption

?

Product Description

This product?is our conpanyintroduces the advanced technology research and

absorbing and second generation product. At the general temperature, can be

put directly into the tyre amrum coarse crushing into 50*50 mm block,so the next

rotaing can grind into 10-30 meshes tagma or wire and fiber separatiom equipment.

specification

This machine is used to cut the whole tire ,tire strips into?50x50mm

1. Tire shredder

2. Tire recycling machine

3. Capacity:?0.8~4ton/h

4. Automatic , CE certificaton

5. Product:?50x50mm

Technical data

Advantages:

1. This machine integrate the waste tire wire cutting and extracting machine, which

reduces the cot and enhances the efficiency greatly!

2. dopts hydraulic reciprocating extracting method, full circle or half circle of

bead wire can be easily extracted.

3. Feedig oil by Duplex Impeller Pump with low operating noise, the two pumps will

supply oil at the same time when the Extracting Cylinder reach out, and only one

pump supplies oil when hauling back the bead wire, so as to reduce the dynamo's

loading current and save energy.

4. The speed and pressure of the Extracting Cylinder will not change when the

Pressing Cylinder is working, so as to enhance the machine's efficiency and extend

the Control Valve's lifetime greatly!

5. Operations are interchangeable between manual and automatic.

Our Waste Tire Recyling Plant can make rubber powder of 30-80 mesh from waste tire,

also, we can collect the scrap wire efficiently, also we have devices to collect and filter

the scrap and waste gas so that we can process the waste tire environmentally.

And we can customize this plant according to customer's requirements, such as

the capacity, the size of rubber powder or rubber particle.