1.8 mm Composite Butyl Sound Insulation Material , Vibration Damping Materials With Self Adhesion

?1.8 mm Thickness Composite Butyl Car Body Sound Deadening Material With Self Adhesion

Specifications:

Description:

ZZ-08 ?1.8 mm Thickness Heavy Duty Car Body Sound Deadening Material

It is made of solid butyl rubber which install as car interior for vibration damping and sound deadening.

Since high?hardness of this model,no need of protection aluminum foil faced.

Solid butyl rubber?sound deadening material mainly used for vibration damping, reducing engine noise, wheel noise, road noise, wind noise ,improve car audio sound quality.

Product size, box design?according to customers' requirement;also welcome to use our standard size product and box.

Features:

. Increases SPL

. Eliminates sound leakage!

. Improves Bass Quality and Reduces Bass Distortion

. Kill unwanted noise, rattles, vibrations

. Full car installation reduces unwanted noises 5-8 dB

. Temperature range of -60 degree ~160 degree

. Service life:7-8years

Areas for application

For auto,install it in door panel,floor,roof,trunk and anywhere in auto.

Sound deadening material can be die cut to shape and placed onto the body surface directly on painted panels or after the sheet metal is cleaned before painting (typically at the sealer application operation). is used to treat metal panels, partitions, ducts, doors, bins, panels, and so forth in railroad cars, buses, automobiles, and ships.?

Installation

Use scissors, knife or die to cut the mat to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduce sound damping capacity. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.

Our products competitive

? Easy-to-install, very high-strength adhesive butyl rubber

? Eliminate body/floor vibration

? Better audio sound quality

? - 60℃ - 160℃

? Fire proofing,water prooing