Butyl Rubber Vibration Absorbing Material , Soundproofing MaterialBulk Pack With Aluminum Foil

Bulk Pack Butyl Rubber Sound Deadening Material With Aluminum Foil For Car Audio Upgrade

Specifications:

Description:

ZZ-06 Bulk Pack Roll Sound Deadening Material contain Aluminum Foil Faced,Butyl Rubber Based and Releasing Liner which?is?manufacture for high effective performance of vibration damping

Logo design shall be printed on the?Aluminum Foil Faced.

Cardboard?in?both sides of?Paper Core protect the sound damping material when shipping.

Bulk Pack Roll?Sound Deadening Material?reduces the?vibration of sheet metal whenever

The material ?is available in 0.46m x 2m,?5m,8m,10m,13m x1.8mm; ?18” x 6.5' ,16' , 26', 32',42' x?70mil

This deadening material can cut ?or die cut into suitable size to meet the customer’s requirements.

It contain Self Adhesive only on one side?which is protected by an?easily strippable release liner.

The Self Adhesive is in very high-tack which let the installation easily and high performance for the vibration damping.

Application

Butyl Sound Deadening Material?is suitable in applications where it is need to dampen or?eliminate the noise from the metal?panel

Sound?Deadening Material?should be applied to a clean dry surface at?room temperature with a hand roller to ensure even?pressure.

It can be die cut to shape and placed onto the body surface directly on painted panels or after the sheet metal ?(typically at the sealer application operation).

? ?Typical applications include:
? ? ? Bodies, doors, firewalls, and floors of trucks,?buses, and off-highway equipment.
? ? ? Metal office furniture
? ? ? Sinks, bathtubs, and shower stalls
? ? ? Air Conditioners
? ? ? Appliance cabinets
? ? ? Rapid transit or railway cars
? ? ? Recreational vehicles
? ? ? Chutes, bins, & hoppers
? ? ? Motor and transformer housings
? ? ? Machine housing belt guards
? ? ? Sheet metal ducts, mixing boxes, and terminal?Units

For Auto ,noise mainly from engine, car body structure, road, wind and wheel so this Sound Deadening Material suitable for bodies, doors, firewalls, and floors.

Installation

Use scissors, knife or die to cut the mat to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the release liner.

The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a roller for larger pieces.

The roller reduces the risk of leaving air pockets, which reduce sound damping capacity.

The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.

(Please note:working wolves should used during the deadener insatllation since the sharp edge of foil)

Our products competitive

? Very flexible, easy-to-install, very high-strength adhesive butyl rubber

? Fire proofing material

? Eliminate body/floor vibration

? Better audio sound quality

??Full car installation reduces unwanted noises 5-8 dB

? -60℃- 160℃

? Service life:7-8years

? Storge : above 500 days (Room temperature storage and stay away direct sunlight)