Computer 50Hz / 60Hz 500va 300W Offline UPS with Lead Acid Battery

500va 300W Offline UPS 400va-1200va Modified Sine Wave LED Display AVR with Built-in Lead Acid Battery

Application Field

1. Computers
2. Home Appliance, such as Fans and lights
3. Office, like computers with Printers

Functions&Features

1. Micro controller(CPU)

2. Waveform ?sqare wave(battery mode)

3. Wide AVR range

4. Overload and short protection

5. Low battery alarm

6. UPS Auto on when AC recovery

7. Humidity less than 90%

Protection Against:

UPS

An?uninterruptible power supply, also?uninterruptible power source,?UPS?or?battery/flywheel backup, is an electrical apparatus that provides emergency power to a load when the input power source, typically?mains power, fails. A UPS differs from an auxiliary or?emergency power system?or?standby generator?in that it will provide near-instantaneous protection from input power interruptions, by supplying energy stored in batteries,?supercapacitors, orflywheels.?The on-battery runtime of most uninterruptible power sources is relatively short (only a few minutes) but sufficient to start a standby power source or properly shut down the protected equipment

Offline/ Standby UPS

The offline/standby UPS (SPS) offers only the most basic features, providing surge protection and battery backup. The protected equipment is normally connected directly to incoming utility power. When the incoming voltage falls below or rises above a predetermined level the SPS turns on its internal DC-AC inverter circuitry, which is powered from an internal storage battery. The UPS then mechanically switches the connected equipment on to its DC-AC inverter output. The switchover time can be as long as 25 milliseconds depending on the amount of time it takes the standby UPS to detect the lost utility voltage. The UPS will be designed to power certain equipment, such as a personal computer, without any objectionable dip or brownout to that device.

Offline/ Standby UPS Diagram

Specification