Welding wire mesh machine

The CNC fencing wire mesh machine is the most advanced welded mesh equipment characterized by adjustable warp wire. You can get the desired pitch easily by inputting the aperture of the weft. If you want to change the pitch during welding, you can input it into the computer according to your requirements. The pitch is adjustable.
The welded mesh by this machine is flat and has low diagonal error. It is rated by an expert of welded mesh as the most advanced mesh welding machine.
1. Maximum width of the welded mesh is 3.0m
2. Diameter of the welded mesh is 2.5-6mm
3. The cross-sectional area of the transformer: 360cm2
4. Primary coil: 60 circles; secondary coil: 1.
5. Controller regulation: Secondary voltage is between 1v and 12v.
6. Air self-cooling type welding transformer is able to self-cool within air, that is, it is a self-cooled transformer and it can radiate heat without the help of a fan or water.
7. Welding form is pressed out at one time and welded separately
8. Cycle fine adjustment is conducted during welding, which may reduce the pollution of electric welding.
9. The welding pressure is adjustable.
10. The dimension of the warp wire is adjustable
11. The pitch of the weft wire is input into the computer and can change automatically

The machine is widely used for welding railway fences, freeway fences and welded mesh for bridges and high buildings.

Products are customized on demand.