Custom Ribbon Mixer Machine / Carbon Steel Powder Mixing Machine

Custom ribbon mixer machine / Carbon steel Powder Mixing Machine

INTRODUCTION:

WLDH-300 Stainless Steel Ribbon Blender / Powder Mixing Machine is an efficient and versatile blending machine for mixing of dry powders, granules and viscous pastes homogeneously. It is able to give perfect result for mixing due to the innovative design of spiral agitator inside of its U-shape chamber.

In WLDH-300 Stainless Steel Ribbon Blender / Powder Mixing Machine, the powder or paste moves from center to the end of container and also from end to the center. In such a three-dimensional way, the total powder or paste is mixed within the chamber. It asks for a short mixing time and relatively low power consumption.

The unit consists of one electrical motor, one reduction gear, coupling, and shaft with spiral agitator. The shaft is sealed with bush & PTFE gland housing at both ends. Materials are loaded from top side, and the discharge is located at the bottom side in the center. The discharge height can be adjusted as per requirement, so that material gets discharged into the container below it without floating dust.

OPTIONS:

(1) Ribbon

We offer several types of spiral ribbon for different sizes and applications.

(2) Construction material

We are able to offer Ribbon Blenders with contact part to be built by Carbon steel, SS304, SS316/316L, Titanium, Duplex stainless steel, Hastelloy, etc. For abrasive materials we offer hardened steel as the contact part. Also we produce Ribbon Blenders all by stainless steel in order to meet the high hygienic requirement.

(3) Feeding & Discharging

A variety of feeding & discharging methods can be selected by the customers.

(4) Drive system

Drive system by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, etc.

(5) Heating/Cooling jacket

Jacketed trough for heating/cooling operation

(6) Vacuum drying & deaerating

The mixer can be designed for vacuum drying & deaerating for special applications.

(7) Spray nozzle

Liquid can be added into the powder by spray nozzles on the top.

(8) Extended height bases

Height of our Ribbon Blender can be defined according to customer’s condition.

(9) Continuous operation

We can supply machines for continuous work when a large capacity per hour is needed for the same material.

Technical parameters:

Attention: all the parameters can be customized.

Feature:

1.? Horizontal tube body, inner & outer dual screw with special structure, running stable, best?

???? quality, low noise, long life, convenient installation, widely usage, with many kind of mixer

???? structure, multiple functions.

2.? Whole machine except for motor is made of stainless steel.

3.? With warm sheet, bearing great pressure, make easy-forming material into difficult forming after

??? ?filling steam.

4.? For different mixing requirements, use different screw structure, rapid & thorough mixing.

5.? There is a split window in the body for cleaning.

6.? Load coefficient large, covering small surface.

Why Choose Us

1. We are the manufacturer (Not Dealer):

All machineries from?Jiangyin Hallo are made by ourselves, with lower price, good quality and assured full after service.

2. Training & Service:

1. We provide you with the prophase plan, process flow design and manufacture equipment according to your special demand.

2. Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

3. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

3. If you are new for this business:

Many thanks for your trust; we can provide you with design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments.

Our Structure:

Our Team: