0.5mm - 1.5 mm Mild Steel RFM Metal Stud Roll Forming Machine With CR12 Blade

0.5mm - 1.5 mm Mild Steel RFM Metal Stud Roll Forming Machine with CR12 Blade

Quick Detail

One of the most common uses for a?Stud Track Roll Forming Machine?is for the Producing of steel stud and Channel. With inflexible web and flange heights these industrial stud makers can produce virtually all of the standard stud and track sizes used in Worldwide Market.

Steel stud manufacturing equipment, stud maker, commercial builings,?Partition Beam Roll forming Machine?
Partition beam roll forming machine (Studs & Tracks Roll Forming Machine) is designed for?
manufacturing high quality studs and tracks in various sizes with our patent technology.

Description

Composition of machine

Roll forming main machine…………………………….1 unit

Manual Uncoiler…………………………………… …..1 unit

Control panel…………………………………………….1 unit

Hydraulic station…………………………………….. …1 unit

Manual out table……………………… ……………..….2 unit

Punching system……………………………………..….1 unit

Motor driven system………………………………….....1unit

Applications

Specifications

1: Coil width: depend on customer profile

2: working speed: 12m—15m/min (not contain cutting)

3: Roll station: 10?stations

4: Material of roller: Gcr15 steel, polished and coated with chrome HRC58-62℃

5:Material of main shaft:45﹟forge steel?? diameter roller: Ф56mm

6: Main power: 7.5kw????

7: Forming thickness: 0.5mm—1.5mm mild steel

8: Transmission: by single line 1.0 inch Chains

9: Size of machine: about 5500 x 800 x1200 (L x W x H)

10: Weight: about 4000Kgs

11: Color: blue and yellow (it is also can changed depend on customer request)

12:?Cutting:??????????

(1)?machine adopt hydraulic cutting

(2)?Cutting after forming: Cut the sheet after roll forming to required length

(3)?Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.

(4)??Material of blade: CR12with heat treatment

(5)??Length measuring: Automatic length measuring

(6)??Tolerance of length: 3m 1.5mm

Working Flow

Decoiling—feeding—roll forming----cut to length—product packing manual

Competitive Advantage

There are many kinds of profiles of the dry wall partition beam & stud partition as the different market has the different requirement, we design and produce the forming machine according to clients’ drawings or samples normally.

This machine is fully automatic and high speed producing continuously, one set of forming rolls can produce various sizes of Stud and Runner just by simply and easily changing the spacers, this enables the production of different sizes products on the same rollers.

This machine is also can be designed for in line punching, punching and cutting in one time. Main motor use AC servo motor with inverter, producing in line speed: 30 meter per minute, quick or slow speed can be adjusted freely. After roll forming, automatic in line punching and cutting continuously. Cutting length: from 3 meter to 6 meter or more, length tolerance: within ±１mm. Automatic products piling table is special designed for high speed production capacity and reduce the production cost, create more profit for the customers.