cast steel swing check valve

Check valve belongs to an automatic valve, whose main role is to prevent the media back to prevent the pump and drive motor reversal, as well as the container medium discharge. Check valve can also be used to which the pressure may rise to exceed the system supply pressure-assisted system pipe on the road. Check valve can be divided into Swing Check Valve (depending on the focus of rotation) and the lift valve (along the axis of movement).
This type of valve is the role of media in one direction only allows movement, but also to prevent the direction of flow. Usually the valve is automatically work, the fluid flow in one direction under pressure, valve flap open; fluid flow in the opposite direction from the fluid pressure and valve flap valve flap from the coincidence of acting on the valve seat and thus cut off the flow.
One float-type check valve, internal thread, check valve, butterfly valve belongs to this type of valve, which includes Swing check valve and lift check valve. Swing Check Valve with ordinary hinge, there is a door the same as the free flap valve leaning tilt seat surface. In order to ensure that the flap valve seat face every time to reach a suitable position, the valve flap design in the hinge body to valve flap has enough to swing space, and make a real flap valve, comprehensive engagement with the valve seat. Valve flap can all be made of metal can also be embedded in the metal on leather, rubber, or synthetic coverage,
It depends on the use of performance requirements. Swing check valve in the fully open position, the fluid pressure virtually unimpeded, so the pressure drop through the valve is relatively small. Check the valve lift valve is located in the valve body on the valve seat sealing surface. In addition to this valve flap valve is free to lift, the other part of the same as the cut-off valve, the fluid pressure valve from the valve seat sealing surface of valve lift, medium return valve flap led to a seat on the back, and cut off the flow. According to conditions of use, the valve flap can be all-metal structure can also be rack mounted in the valve flap rubber mat or rubber ring form. The same as the cut-off valves, flow through the lift