Adjusting high volume low pressure spray gun for painting automotive 6.0 - 11cfm

Description:

ST-828 Piant Spray Gun Explosive Viewing :

ST-828 Enviromental Friendly High Volum Low Pressure Piant Spray Gun 600ml Noylon Cup:

Using the following guidelines will help you learn some spraying techniques to produce an even coverage and quality finish.
?

Keep your Distance Consistent

Start by getting comfortable moving the spray gun and learning to maintain the recommended distance from the surface. Ideally the gun (spray tip) should be pointed at the surface to be sprayed - square to the wall (perpendicular) - and held approximately 12 inches from the surface. Move your arm while keeping the gun pointed straight at the surface being painted. Fanning the gun to direct the spray at an angle can cause an uneven finish. Flex your wrist slightly at the beginning and end of each stroke to maintain an even coat.

A good exercise to get the feel for the proper gun movement is to hold the spray gun with the tip guard about 2 inches away from the wall and move the gun back and forth (horizontally) along the wall while maintaining a 2 inch distance (do not actually spray, only focus on gun positioning – note how at the beginning and end of each stroke you must bend your wrist slightly to ensure you keep the tip at the same distance). Once you are comfortable at a close distance, move back to 12 inches away and practice a few more times, remember to watch the position at the beginning and end of your reach (if you don\'t maintain the same distance and flare out at the beginning or end - common for first timers – you will notice the spray