PC5T wet spraying machine

PC5T wet spraying machine

Product Introduction

PC5T wet spraying machine is mainly used in iron (public) road tunnel project. Equipment is easy to operate, low dust, low rebound, protect the environment and improve the quality of shotcrete, a special vibration hopper can successfully enter the concrete batching system.

PC5T wet spraying machine using low speed vortex air transport, close-jet works to overcome the plugging, pulse, segregation and other issues. Makes jet stream uniform and stable. Improve spray layer material.

Wet spraying machine is used for wet shotcrete equipment, compared with dry, tidal jet aircraft, which has the job of small dust, spray a small rebound, protect the environment, save raw materials and improve the quality of shotcrete and other significant advantages, and operation and maintenance convenient.

Feature

Special vibration hopper enables the wet concrete mix well into the rotor chamber;

The new metering pump can be accurately and evenly add liquid accelerator;

Discharge elbow make the material flow uniform, continuous, stable, pulse small, and eliminate the wet concrete bonding plugging the system working pressure decreases.

Technical Parameter

Model         PC5T

Rated work pressure            5m3/h

Conveying distance   0.4MPa

Conveying distance(horizontal/vertical)nbsp;  80/30m             

Air consumption  8m3/min               

Max aggregate dia           ≤20mm             

Mix water-cement ratio0.2～0.35%         

Dust concentration    ≤20mg/m3

Chassis rail wheels distance 600/762/900mm

Outer size(L*W*H)1530×818×1188(mm)

Conveying pipe diaφ51mm               

Rotor speed11r/min           

Motor power5.5kW

Voltage class～380/660V