PVA cement fiber

Specifications

Welcome you to Beijing Guanghui Textile Co.Ltd

Specifications

1. 100% Polyvinyl Alcohol   

2. Sepcification: 2.0D*6mm/12mm
3. Used in cement wave tile, PVA fiber floor slab, cement cable tube,etc

4.. The best quality,the best service 
5. High strength and modulus

   PVA high strength and high modulus fibers for building 

 More detial:

Function of PVA Fiber:

1.It has good mechanical character,can improve the strength and impact of the architectural materials.

2. It has good performance of acidoresistance and it is suitable for all cements.

3. It has good disperstiveness.

4. The deflection temperature and the cold resistance of the cement board and cement bricks can be increased 50%.

5. Improve operating conditions.

Use instruction:

1. Mixing amount: Only one-fifth of asbestos.

2. Stirring requirement: It is no need to change the proportion of cement, sand and aggregate.

For cement concrete: crushed stones, fibers, cement and sand are put into the blender and stir for 30 seconds, then put water and stir for 1 minute.

For  asphalt concrete: Put crushed stones, sand and fibers into the blender and stir for 20 seconds. Then put the asphalt and stir up. The total time of stirring is not less than 60 seconds.

Application Field:

1. The road, surface of road, bridge floor, runway and floor of the factory.

2. Port, deepwater wharf, project in the severe cold area.

3. Anti-collision wall of highway, anti-impact board.

4. Reservoir, swimming pool.

5. Side wall and roof of the basement.

Welcome you inquiry.