1550nm 10 / 100M Single Mode Optical Fiber Media Converter 20km, 40km, 60km, 80km

Technical Specifications

◆Operating standards:IEEE802.3u, 10/100Base-TX and 100Base-FX；

◆MAC addresses table: 1K

◆Data buffer: 128K.

◆Connectors: UTP Connector: RJ-45, 10/100Mbps; ?Fiber Connector: SC, 100Mbps

◆Cable:

UTP: Cat. 5 UTP cable (the max distance up to100m)

Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km)

◆Flow Control

? Full Duplex: IEEE802.3x

? Half Duplex: back pressure

Order Information

◆The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.?

◆Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex

◆The UTP port supports MDI/MDI-X auto crossover.

◆Supporting 1600 bytes packet for management.

◆Internal circuit of prevented thunder could greatly reduce damage of converters caused by thunderbolt induction.

◆Indicator function of link fault (LFP): When optical fiber is at fault, the converter could stop all the link.

◆Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode.