Aluminum/PVC Window And Door （Curtain Wall）Machine-CNC Double Mitre Saw

Introduction:
◎ Used for profiles such as aluminum profile and curtain wall, two heads cutting angle
   90°45° 67.5° (22.5°) are available.
◎ Cutting dimension controlled by screw, with high accurate driving and locating. Right
   head can achieve the setting location automatically. Right head feed the profiles
   automatically; can also use for cutting aluminum connectors.
◎ Japan CNC system adopted, which include PLC, touched screen, servomotor, and
   servodriver, photoelectrical switch, and photoelectrical cells etc. Complete Japan
   CNC system results highaccuracy and smooth working.
◎ Uniform speed feeding and smooth motion due to air-draulic damping cylinder.
◎ Saw blade feeding system adopts imported linear guide kinematic pair results high
   accuracy.
◎ Automatic protecting guards result convenience and safety.
Technical Parameter:
Model                                        LJZ2-CNC-500×5000  
Input voltage                           380V/50Hz
Input power                             6.0Kw 
Air pressure                            0.5~0.8MPa
Air consumption                     200L/min
Motor rotation speed             2800r/min 
Cutting length                         400~5000mm
Cutting width                           10~130mm
Cutting height                         10~300mm
Cutting angle                          90° 45° 67.5°
Saw feeding speed               0~3m/min
Saw blade standard              φ500×4.4×φ30×Z120
Overall dimension                 6300×1700×1600mm