Sell Rigid Waterproofing Slurry

Model No.:NIC-K11
Product Origin:China
Brand Name:NICBOND
Price Terms:FOB
Payment Terms:T/T, L/C
Certification:
Description:Features and benefits: 1) Can be applied on damp surface 2) Strong bond strength to substrate of concrete and render. The active element permeates into capillary pores of the substrate and forms a compact waterproof layer 3) After the slurry membrane is dried, tiling can be done using Nicbond tile adhesives 4) Can be used either on interior or exterior wall and floor 5) Long term water resistance and good durability 6) Water vapor permeability 7) Water based, non-toxic, easy to apply Application scope: 1) Interior and exterior 2) Underground garages, cellars, tunnel, concrete units, factory, warehouse, swimming pools, drinking water tanks Surface preparation: 1) The surface must be sound, clean and free from any contaminants such as oil, grease 2) Obvious pore and crack must be plastered with repair mortar, and sharp edge must be removed Instruction: 1) Mixing ratio: 25kg powder to 6-7kg of water 2) Pour a suitable amount of water into a clean container and slowly add the powder into water with constant stirring until the lump-free mixture is achieved 3) Keeping interval mixing to avoid deposition 4) Apply rigid waterproofing slurry with a trowel and spread evenly on the surface 5) The second coat is applied after the first layer is dried. The third coat is applied when necessary Specifications: 1) Approx.1.5~2kg/m² (depending on the substrate condition) 2) Appearance: powder type without agglomerations 3) Setting time: a) Initial setting: ≥10min b) Final setting: ≥6h 4) Compressive strength (3 days): ≥13MPa 5) Flexural strength (3 days): ≥3MPa 6) Water permeability (7 days): a) Net mortar: ≥1.2MPa b) Coating: ≥0.4MPa 7) Freezing-thawing resistance (-15~20°C): 20 times no change 8) Heat resistance (100°C, 5 hours): no change 9) Bond strength (7 days): &Ge;1.4MPa Dosage: About 2.5 to 3 kilograms powder for each square meter. Precautions: 1) Other coating should not be done until the waterproof layer is entirely dry and cured 2) Do not use the product with the temperature below 0°C or in the condition that is very damp 3) Do not mix the cured slurry with water and reuse it 4) Do not add other materials including cement, stone Standard executed: This product is in accordance with the JC900-2002 standard of "inorganic waterproof and leakage-preventing materials". Shelf life: Unopened bags can be stored for up to 12 months in a cool dry environment. Packing: 25kg/bag, 5kg/bag