Sell Building Thermal-Insulation Materials

Model No.:
Product Origin:China
Brand Name:NICBOND
Price Terms:FOB Guangzhou
Payment Terms:T/T, L/C
Certification:
Description:This product is a kind of high-strength inorganic adhesive specially developed in allusion to the case that common cement cannot be used as the light construction material, polystyrene board. It can substitute various organic cementing agents, lowering greatly the cost of construction. Features and benefits: 1) Firm adhesion, excellent weather, so as to ensure the permanent firmness and adhesion of light construction materials 2) Thin mortar technology adopted, with 1.5 - 3mm thick mortar, so as to lower the weight of building and the cold and heat bridge in the insulation layers 3) With proper flexibility, able to compensate the temperature difference stress between the light construction materials and outer decoration paints due to difference from expansion coefficients 4) Safe, innocuous, anti-mildew and flameproof 5) A certain water resistance Application scope: 1) The sticking between the polystyrene foam boards of outer insulated system of the external wall and the basic surface wall, and render of the protection layer of the foam board 2) The sticking between such light boards as outer wall foam board decoration line, expanded perlite and so on with the basic surface 3) The bricking mortar for air-added concrete brick, ash sand brick, powdered coal ash light brick, and gypsum bricklaying 4) Sticking or bricking materials for foam board indoor partition, indoor and outdoor insulated board Substrate preparation: The substrate should be firm, even and free from grease or other loose substance. Instruction: 1) Mix powder and water at ratio of 3.57:1 (i.e. 20kg powdered: 5.6kg water), then mix with an electrical mixer until it is equal, lump-free mixture is achieved; let it stand for 3 minutes, then re-stir and ready to use 2) When it is used for the sticking between the polystyrene foam board, foam decoration line and the substrate notched trowel, use to spread the adhesive onto the substrate or the back of the foam, the foam decoration line, also point pasting method can be used; following application should be done more than 24 hours after this application 3) When laying light bricks, the moving and adjustment shall be finished within 10 minutes Specifications: 1) Tensile and bonding strength (with 20kg/m