Loop Calibrator YHS-101

4 1/2 LCDdisplay with font height22mm.

Over range displays "1".

Power output 24V DC, which can serve as the working power of 2-wire instrument.

0-10V, 0-20mV, 0-100mV, 0-20mAand 0-22mADC signal output scales are available, which can serve as the input and output signal of type II and type III instruments and can simulate various of type II and type III instruments in field verification.

?

200V, 20V, 200mV, 100mAand 20mADC signal measuring scales are available, which can be used to measure the working voltage of the instrument and the input/output voltage or current signal of the instrument.

The Calibrator can working under condition of 24V power, output DC signal and measuring function simultaneously.

The Calibrator has quadruple half digits LCD display, it can display the output value, measured value and unit through use the rotary switch.

?

??? The design of the Sealed case for the Calibrator complies with international safety standards and removed the battery cover.
??? New sensitive induction knob make it fast, easy to use and long life, it can be operated with one hand. X1/X10/X100 can be adjusted through the potentiometer output by using this knob.

?

Output Function:

Current：0-22.00mA、0-19.999mA;??? Accuracy: 0.05%;

Voltage：0-10.000V、0-100.00mV、0-19.999mV;?? Accuracy：0.05%;

24V power output from the calibrator is independent.

?

Measure Function

DC Voltage：0-199.99V;?? Accuracy：0.05%;

DC Current：0-100.00mA;? Accuracy：0.05%;

Built-in rechargeable battery pack (with charger)