Fully automatic wire terminating machine HL-01

automatic terminal crimping machine

Details :

Features: cut off the wire, single-ended skinned, double-skinned side, single-ended Crimping, twisting single-ended line 
 And the quality of services: one from Japan's Mitsubishi products to work together. 1. 3UPLC control of Mitsubishi of Japan. 2. Adopt Japan's Mitsubishi servo motor. 3. Japan's Mitsubishi used man-machine interface. 4. Japan's Mitsubishi to adopt the most advanced electronic positioning. 5. Mitsubishi offers a full range of the design process.
Second, the mechanical part of the long three-year warranty, three terminal motor OZ machine.
Third, the use of Japan SMC pneumatic and electronic valves.
Fourth, using Japan Rail THK, Japan Sumitomo reducer, Japan and Omron sensors Ji Enshi.
Fifth, the company provides training, installation, commissioning, maintenance, repair one-stop service.
Product specifications
 
 
Function to cut off the wire, single-ended skinned, double-skinned side, single-ended Crimping, twisting single-ended line
Processing capacity of 3600 --- 3800PCS / hour when the minimum tangent
Adapt to the wire AWG1007 # 18 ---- AWG # 32
40mm-9999mm length cut off part of the replacement parts can be cut off to 25MM
Changes in the scope of the precision cut off: 1MM + * cut off the length of 0.2 percent
Peeling length 0.1MM-- 10MM
Crimping capacity of 1.25 tons
Twist-length AWG # 30 --- AWG # 26 (4MM - 8MM)
Whether or not cable detection device, whether or not terminal, Dies anomalies such as bad
AC220/220V 50/60HZ single-phase power supply
Compressed air 0.5Mpa (5kgf/cm) about 200NL/Min
Body size 708W * 600L * 1098H (MM)
About the weight of 168KG