VAG DASH COM + CAN V5.05

Standard carton

Note: Plese do not use software provided by other sites or downloadable sources.  Your software will be shipped on CD along with the VAGdashCAN Interface

This is the New Version 5.05.

Email:adktechjulie@hotmail.com

Description
VAGdashCAN v5.05 USB can access EDC16 by OBD for EEprom in Audi VW Touareg Phaeton usw.

New Features
EDC16 / EDC15 / ME7 can be accessed by OBD for EEprom Reading and Writing (EDC15 / ME7 are completely supported while EDC16 support is currently being expanded)

The VAGdashCAN high-performance tool covers up the new generation of instrument clusters from 2002.  Some vehicles included are Golf V, Touran, Passat B6, Jetta, new Seat models (including Altea II) and new Skodas.

VAGdashCAN Functions

• recalibrate the odometer
• add keys to the car even though you don't have all existing keys available
• do key adaptation without 5 minutes delay on new keys
• read out the login / secret key code (SKC)
• write the vehicle identification number and the immobiliser number
• download and store the entire immobiliser block decrypted
• clone instrument clusters by writing the immobiliser block from a file
• read out trouble codes of CAN-ECU′s and erase them

Perform functions are absolute unique and give you the chance to earn the money performing functions only dealers can normally perform.

Adapting Keys + Special Feature
The normal diagnostic procedure requires that all adapted keys are available.  VAGdashCAN allows add a key to the existing ones without erasing them.  There is also no 5 minute wait for adaption channels to become avilable.

Easy and Fast Instrument Cluster Replacement

• Read out the original immobiliser block and store it
• Replace the instrument cluster with a new cluster
• Write the original immobiliser block to the new cluster
• Keys do NOT need adapted and there is no worrying about immobilizer type classes.  In fact you don't even requre the keys on hand.

Supported Vehicles

Screenshots (old version)

Software Installation

1. uninstall the vagdash software first if you installed it before
2. connect the vagdash cable with the computer
3. install driver first. make sure select USB port, NOT COM port!
4. install the software.