Vag commander 8.1

Standard carton

ABRITES Commander for VAG is a Windows PC based diagnostic software for the vehicles from

VAG. With the help of this tool you can perform operations with vehicles from the VAG group,

which are in most cases unsupported from the producer diagnostic testers. The ABRITES
Commander for VAG provides you also a full diagnostic capabilities for VAG-vehicles.
 
Highlights:
 
Extracting security access codes (PIN) by OBDII
Programming keys by OBDII. Preparation of dealer's keys.
Mileage recalibration by OBDII
Clearing crash data DTCs by OBDII
Read/Program flash memory of engine control units by OBDII. Options for resetting the number
of flashing attempts.
Exchange speed limit of MMI-TV system
Standard diagnostic functions:
 
Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO
transport protocol (CAN), KWP1281 or KWP2000 over K-Line
For all electronic control units reading identification data
For all electronic control units read error (DTCs)  
For all electronic control units clear error (DTCs)
Scan all units
Broadcast requests
Measured values
Adaptation
Special functions:
 
Instrument CAN
With this function you can establish diagnostic session with the Instrument cluster using
KWP2000 over TP2.0
You can read current odometer value
You can change odometer value
Added support for VDO Instrument Cluster 2006+
Read/Program memory of instrument cluster immobilizer
Reading security access code of the IMMOBILIZER
Reading security access code of the IMMOBILIZER
Reading security code (PIN) and component protection by OBDII - VW CRAFTER
Read/Write immobilizer related data
 
EZS - Kessy (Q7/A6/Allroad)
With this function you can prepare dealer key/learn dealer key
Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)
Instrument K-Line
With this function you can establish disgnostic session with the Instrument cluster via K-Line
(KWP1281 or KWP2000)
You can Read/Change odometer value
Read PIN code
Read/Write eeprom
Read ROM/Flash from the Instrument cluster
 
Engine Control Unit
Read EDC17/MED17 flash memory
Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flashmemory via OBDII (K
and CAN). Calculation of
checksums while programming, ME7.1.1, MED9.x, ME7.5)
Read/Write flash counters (EDC16)
Read/Write eeprom (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic
ME7.8.)
Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17,
 
MED9.x, Simos PPD)
Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16,
MED17.5.1, MED 9.x, Simos PPD)
Enable/Disable immobilizer (EDC15, ME7.x, EDC16)
Odometer correction (EDC15, EDC16)
Kessy adaptation
This function can be used for adaptation of brand new kessy units to the car. This adaptation can
be by CAN TP2.0, K-KWP2000 and also can be used with Porsche Cayenne.
TV activation ED1/ED2
Using this special function you can change speed limit of MMI compatible vehicles to change
speed where TV becomes OFF
Key learning
With this function you can learn key/transponder to the vehicle
Dump tool
With this function you can calculate security access codes, change odometer and so on from
EEPROM dump from the correcponding unit
Airbag
With this special function you can Read/Write EEPROM memory of the airbag module
Clear the crash data of the airbag module
Custom Read/Write
Using this application you can read/program memory in some electronic control unit
PIN Convertor
Service interval
Using this function you can perform reset of the service reminder, reset of the service interval
parameters or change service interval options
Remote control adaptation
Using this application, you can learn remote controls
Navigation
Using this application, you can enable/disable the !Eject!– button of the !Navigation!– syst
Cruise control system
Using this application, you can activate/deactivate a cruise control system and change the related
steering wheel electronics( SWE) configuration if SWE unit is available
Brake pads change
Using this application, you can !Open rear parkig brake for pad change!–, !Close rear parkin
brake!–, perform !Parking brake function test