High Flow Manual Nozzle

Features:

1) For high-flow, bulk fuel oil delivery service

2) Materials:

    a) Body: cast aluminum

    b) Seals: buna-N, viton

    c) Main stem: brass

    d) Spout: aluminum

3) Weight: 1.52kg/pc

4) Ordering specifications:

    a) Inlet size: BSP1+1/2", NPT1"+1/2", BSP2", NPT2"

    b) Outlet diameter: 110/13"

    c) Flow rate: 0-290L/m (110/13")

5) Working pressure: 0.18MPa

6) Aluminum body: light weight and easy to operate

7) Compound lever: two fulcrum points permit nozzle to be easily and slowly opened, then quickly opened fully makes topping off easy

8) Easily replaced spout: the spout is easily threaded into the body

9) Replacement spouts available

10) Replaceable hold-open rack: one-hand control of hold-open mechanism gives easy setting of flow rate

11) Nozzle must be attended at all times during usage

12) Replaceable composite lever guard: easy, low cost replacement should be guard against broken

13) Easily replaced swivel: can change the connecting between different thread and different caliber

14) 100% factory tested

15) Warnings:

    a) Using foreign objects to hold open

    b) Automatic nozzles could result in

    c) Failure to shut-off and personal injury

16) Weight: 1.60kg/pc

17) Replacement parts:

    a) Key 1: spout

    b) Key 2: main valve assembly

    c) Key 3: cap

    d) Key 4: lever

    e) Key 5: replaceable swivel

Outer packing:

8pcs/ctn

Carton dimensions: 47 x 38.5 x 35cm

N.W.: 12.2kg