PLC Controlled Thicker Sheet Vacuum Forming Machine

Place of Origin	China

Working cycle: carry materials by hands, clamp the materials, oven move along to forming area, heating, oven move back to heating area, lower-mold up, forming globularity by air pressure, vacuuming/ blowing/ pressing, cooling, automatic degassing, mold unload, lower mold down (upper mold up), unload the finished product by hand.Basic units: 1) Heater adopts ceramic heating bricks2) Heater drives by cylinder to insure heater work fleetly and placidly3) Clamp unit, controlled by pneumatic electromagnetic valve. Clamping unit assembled synchronous unit for material pressing. This machine adopts iron clamp bracket, which can bear high temperature, avoid the clamp bracket metamorphosed and adjust width and length arbitrarily4) Complete vacuum system includes vacuum room, vacuum pump, vacuum storage gas pot, vacuum pipeline, adjustable air cleaner device and vacuum controlling unit5) Cooling system assemble air blower and spray gun. The direction of air blow a spray gun could be adjusted according to different products making6) Automatic degassing before mold unload7) The equipment with the safety and protection equipment8) This machine controlled by PLC, touch screen control system and display and control all the operation of equipment. Operation panel installed at the left of front side and free to turnPacking: wooden packing producing area:China payment:50% T/T deposite,the balance will be paid before shipment