HY Thicker Sheet Vacuum Forming Machine

Place of Origin	China

Working cycle: carry material by hand, clamp, heating, blown, forming, cooling, lower-mold replace, mold unload, unload the product by hand.Basic units: 1) Heater adopts ceramic heating bricks2) Heater drives by cylinder to insure heater work fleetly and placidly3) Clamp unit, controlled by pneumatic electromagnetic valve. Clamping unit assembled synchronous unit for material pressing. This machine adopts iron clamp bracket, which can bear high temperature, avoid the clamp bracket metamorphosed and adjust width and length arbitrarily4) Complete vacuum system includes vacuum room, vacuum pump, vacuum storage gas pot, vacuum pipeline, adjustable air cleaner device and vacuum controlling unit5) Cooling system assemble air blower and spray gun. The direction of air blow an spray gun could be adjusted according to different products making6) Automatic degassing before mold unloadExcellence of equipment:1) Heater (controlled separately) a) Heater separately: set different temperature according material forming demand to insure product quality. The temperature and the voltage adopt dig-display voltmeter, which can realize temperature and the voltage adjustment and improve temperature and save temperature b) Change the heater units fleetly. And it is economical for maintain because it only need change part units2) Controlling the heater unit separately can short the heating time and economize energy and improve product quality and reduce cost3) Adjustable frame: The side size clamping is 20 - 50mm which can economize the material. The total of economized material is a considerable amountPacking:Wooden packing producing area:China payment:50% T/T deposite,the balance 50% T/T