Heat transfer liquid sublimation coating

1)good quality and bottom price
2)transfer coating is suitable for metal, ceramic,glass
 

sublimation coating for ceramic:for hard surfact objects, like mugs, tiles, metal board etc....

The products may spraying, coating, crushed James, Brush and other methods of construction.   Lean Construction materials : benzene, esters, alcohols, ethers and other rare materials mixed solvents.   Viscosity : construction technology requirements may be adjusted by adding an appropriate amount of rare material. If immersed in a beaker 2 coatings generally adding 1.1-1.4 xylene or toluene or 100 copies of 'rare and 0.72% respectively a gainst the use of solvent oil

Attention:

1).   glass ,metal ,ceramic or other flat objects ,can be pressed under 220-225 centigrade (degree)with 30-40 secends.
2).    pvc ,eva cards and other materials doesnot withstand high teperatures ,you can put a wet cloth underside before pressing ,to prevent deformation after pressing,you should place the objects on the slad with heavy and get until it cooling off.

3)Dry the coated goods in nature and don't touch them until they are dry,then put them into the over 200 centigrade constant temperature for about 10 minutes,then take then out and transfer the pictures on them.

Our factory is professional in heat transfer vinyl , transfer paper, sublimation printing machine,

heat transfer printer machine, inktec sublimation ink , our products is good quality and hot sale in the world.

the advantage of our products:

1) some of them are free sample

2) short delivery time

3) Bottom price& high quality

4) good after-service