Jiabao Matt Pet Film for printing for label and heat transfer label

Jiabao Matt Pet Film for printing

1)product information

Product name: Jiabao Matt Pet Film for printing  .(back coating)

Product model:1185-B

Product specification:48*64cm,39*54cm,44*60cm,100pcs/ctn

Thickness: 50um,70um,,100um(Special specifications can be customized)

Product features:the heat  transfer temperature between 130-150 ℃, the heat transfer effect completely, beautiful matte effect.Is the commonly used heat transfer film substrate on the heat transfer market at present. Because of the back coating the adhering  layer, Can prevent the adhesion failure of products from long distance transportation and pressure.And isolation of paper and transportation costs can be saved. Through multi-channel applicator precision processing and become, quickly absorb ink layer, high surface smoothness, can reach 175-210 line network printing, no matter fine patterns or colors printing can achieve the ideal effect.

2) application manual:

1. Apply to printing: offset printing, screen printing, gravure, flexo hot peeling heat transfer products.

2. Applicable heat transfer materials: cotton, chemical fiber, cotton blended fabric, EVA, non-woven fabrics, leather and other heat resistant fabric

3.Peeling method: cold peeling  .

4.  transfer material: water (301, 305 series heat  transfer). Oily (JB W series heat transfer ink, HMA, 529, 530, 531 series heat transfer glue). Weak sublimation offset printing ink, etc.

5. Applicable heat transfer sticker level:A,B,C,D,E,F(According to the Kenteer company standard)

3)Products using the matters needing attention

1. before transfer,keep printing substrates clean and tidy;

2. At printing and  production, avoid contact with sharp objects, in order to avoid scratches, impact effect

3. At printing and  production, avoid contact with hot objects

4. Offset printing,pay attention to the light to take and light put, prevent scratch color printing design;

5. Putting it together should not exceed 20 after printing offset printing products, prevent print the stick.And enter pump suction wet wet room 12 h about 40 ℃,after the offset printing ink drying,then screen printing.

6. This product is applicable to water-base silk screen printing ,oil-base silk screen printing ink, and Plastisol ink 

7.After Silk screen printing baking temperature between 50 ℃ to 65 ℃ advisable, to prevent high temperature lead to slight deformation generates set of bit of film  not accurate

8.Before transfer the image,cut out the other parts of the blank and with 2 mm border.

9.Transfer temperature:130℃-150℃,Transfer time:6-15s  Press:20-30 pounds

10. Machine time out, lift or move the machine heating panel, after product cooling tore away from the film, the effect is better.

11.In the  general situation, open the surface packaging as a printing surface

12. This material belongs to the defence of the sticky materials, but should add a proof sticker of heat transfer sticker finished product packaging.

 Pls send me an inquire  to below email