Jiabao best price heat transfer Pet Thermal Film

Jiabao best price heat transfer Pet Thermal Film

1)product information

Product name: 1184 glossy& hot peel release film

Product model:1184-2

Product specification:48*64cm,39*54cm,44*60cm,100pcs/ctn

2) application manual:

1. Apply to printing: offset printing, screen printing, gravure, flexo hot peeling heat transfer products.

2. Applicable heat transfer materials: cotton, chemical fiber, cotton blended fabric, EVA, non-woven fabrics, leather and other heat resistant fabric

3.Peeling method:hot peeling 

4. Applicableheat transfer material: water (301, 305 series heat  transfer). Oily (JB W series heat transfer ink, HMA, 529, 530, 531 series heat transfer glue). Weak sublimation offset printing ink, etc.

)

3)Products using the matters needing attention

1. before transfer,keep printing substrates clean and tidy;

2. At printing and  production, avoid contact with sharp objects, in order to avoid scratches, impact effect

3. At printing and  production, avoid contact with hot objects

4. Offset printing,pay attention to the light to take and light put, prevent scratch color printing design;

5. Putting it together should not exceed 20 after printing offset printing products, prevent print the stick.And enter pump suction wet wet room 12 h about 40 ℃,after the offset printing ink drying,then screen printing.

6. This product is applicable to water, oily silk screen printing ink, but does not apply to thermosetting ink Plastisol ink 

7.After Silk screen printing baking temperature between 50 ℃ to 65 ℃ advisable, to prevent high temperature lead to slight deformation generates set of bit of film  not accurate

8.Before transfer the image,cut out the other parts of the blank and with 2 mm border.

9.Transfer temperature:130℃-150℃,Trnsfer time:6-15s  Press:20-30 pounds

10. Machine time out, lift or move the machine heating panel, please be sure to tear up the film above immediately