High power 500W metal and nonmetal co2 laser cutting head, control card, sensor and more

Adaptive software:  MetalCut

Technical parameters:

• Digital laser control signals, differential output, TTL level, up to 20mA driving capability

• PWM frequency can be adjusted from 2.5KHz to 100KHz. PWM duty ratio is 1%~99%

• Laser power control: analog voltage, 0~5V adjustable according to the motor control signal differential output, TTL level, 20mA driving capability, the max. motor control pulse frequency is 500KHZ.

• The USB max. transmission speed is 12 Mbps, the longest distance is 5 meter.

• 4-way generalphotoelectric isolation OC gate output, the max.drive capability is 600mA.

• Linear/ circular/B Spline interpolation precision: +/-0.5pulse

• 4-way generalphotoelectric isolation, TTL level

Application Area:Metal and non-metal laser cutting

III. LFS-AM-T43 Analog Metal Live Focus System(with a touch screen)

Application Area

Metal cutting,non-metal cutting,uniaxial automatic control field

Technical Parameters

• Digital quantity input detection, 24-bit precision;

• Analog output +/-10V,12-bit precision;

• General I/O output,photoelectric Isolation,high-power output to drive the relay,24V standard;

• Dedicated motor interface,the limit switch input,pulse output frequency up to 500 KHZ;

• 2-way PWM output, 24V and 5V level can be configured, the output frequency up to 100 KHZ;

• Quadrature encoder input, TTL level;

• Single data acquisition time≤2ms. 

• Low pressure punching, gradual punching, low pressure cutting, etc.cutting method.

IV. 2 phase motor (42HS08) and driver (DM556)

Electric