Dual triple power supply adapter connector Relay Adapter link multiple add2PSU

 The PSU circuit board measures just 73mm x 25mm (2.85″ x 1.00″) and due to it’s rather small size, it can be mounted nearly anyplace. The PSU comes with a 2″ x 1″ strip of 3M double sided tape on the back that covers up the solder points on the back of the PCB to keep them from shorting out and also allows you to easily mount it to your case. The sides of the PCB also have holes in them, so you could also screw it or zip tie it to something inside your PC case. The ends of the PCB don’t contain any trace routes, so if you really wanted to you could cut the ends off the device and shorten to just roughly 2.1″ if you wanted to.

Features :

The Psu and Psu-D adapters have many features:

Solid State PC board
Non-heat generating
Compact design
Multiple mounting options
Virtually unlimited PSU’s
Installs in less than a minute
Fits almost anywhere in the case
Delay adjustments from 5 seconds up to 10 minutes

Due to the power seat is made of plastic, plug line please hand hold transposon and then plug the line, to avoid the bad power supply plug. Insert line must have a clear understanding of the direction and the inside of the socket, avoid inserted opposite caused by burning equipment.

More details, please don't hesitate to contact us.

Name:Lin Zhang

E-mail:zhanglin@