6pin PCI-e Express 1X to 16X Riser Card With Molex 4pin PCI-e riser cable PCI-e riser card

6pin PCI-e Express 1X to 16X Riser Card With Molex 4pin PCI-e riser cable PCI-e riser card 

• 2 layer PCB board design .
• 1-slot PCI-E 1x riser card with high speed USB 3.0 cable
  • High-speed FFC cable is flexible for 1U, 2U and 3U chassis
  • Supports high speed PCI-E 1x, 4x, 8x, 16x card (but only provide 1x speed)
  • USB 3.0 Cable length: 60cm
• provide extra power suppy for PCI-e video card
• NOTICE: It only can get 1X band width from the PCI-E 16X slot for your 4X,8X or 16X device.
  Product Features: 
  • A: graphics power using two FP solid capacitors, the card supply more safety. 
  • B: transfer cassette port or 4PIN interface strengthen the power supply, so that the graphics power independence from the motherboard, so as to reduce the burden on the graphics card. 
  • C card slot: the original goods into the connector, the graphics card is better.
  • D:PCI-E connector using multilayer shielding wire, the longest can take 3M without signal attenuation 
  • E: comparison of soft wire, wiring is convenient, want to put it on the card. 
  • F:PCI-E connector plug all gold, more wear and increase conductivity. 
  • G: slot with a fixed buckle, convenient disassembly and fixed graphics card, the card will not fall off from the slot.
  • 
     

   

  • Molex 6pin Riser Card :
     
     
     

  More details, please don't hesitate to contact us.

  E-mail:zhanglin@