dynamic deformation modulus tester

dynamic deformation  modulus tester

Product Details:

LFG type Evd dynamic deformation modulus tester, falling weight bearing capacity of foundation Tester, is for high-speed rail-based bed surface and the transition section of the Evd graded gravel testing, the new railway, the existing railway speed transformation K30 detection, as well as the highways, airports, urban transport, ports and industries. Determination of embankment under the action of moving loads bend value is to assess the amount of subgrade bearing capacity and deformation.

Scope of application:

Rail / road earthwork construction

Ditch soil quality test

Cable trench fill pressure test

Construction cushion Detection

Backfill the basis of quality test

Pile dipping test

Building the foundation frame deformation detection

Features:

²Small size, light in weight to carry - the total weight of 35 kg

²Installation and removal easy, simple - a person may operate

High degree of automation, test speed - a test just 3 minutes

Performance is stable, reliable, high precision - the use of advanced sensor technology

Environmentally friendly products, has been people-oriented - no radiation, exhaust and other pollution

Technical parameters:

Loading Device

Total weight: 15.0kg

Drop Hammer Weight: 10.0kg

Maximum impact: 7.07kN

Impact duration: 18.0 ± 2.0ms

Material: Galvanized steel / alloy steel

Load plate

Diameter: 300mm

Thickness: 20.0mm

Weight: 15.0kg

Material: Galvanized steel

E-subsidence Tester

Subsidence Test Range: 0.1 ~ 2.0mm ± 0.02mm

Evd test range: 10MPa ~ 225MPa

Power Supply: 4xR6 Battery

Temperature range: 0 ~ 50°C

Appearance Dimensions: 210mmx80mmx25mm

Storage capacity: 200 Group Test Curve

Weight: 0.4kg