ALCON APE-5005P Wireless Outdoor AP Bridge Repeater Client 5Ghz 11a 54mbps 400mW with integrated 23dbi Flat Panel Antenna

Standards Compliance

SDRAM

Flash

Radio Frequency Type

OFDM

Modulation

Frequency Band

Transmission Power

802.11a: 21dBm@54Mbps; 22dBm@48Mbps; 23dBm@36Mbps; 26dBm@6~24Mbps

Transmission Rate

IEEE802.11a: 6/9/12/18/24/36/48/54Mbps

Access Point Interfaces

Auto sensing MDI/MDI-X Ethernet 10/100Base-TX: RJ-45

Sensitivity

IEEE 802.11a: -94dBm @ 6Mbps; -74dBm @ 54Mbps, PER < 10%

Antenna Type

External

Security Systems

64-bit/128-bit/152-bit WEP encryption; WPA/ WPA2 (-PSK using TKIP or AES) WPA/ WPA2 (-EAP using TKIP); 802.1x Authenticator; Hide SSID in beacons

Wireless Setting

Operation Mode – AP/ Client Bridge/ WDS Bridge PtP and PtMP (up to 16 links)/ Client Router
Channel Selection (Setting varies by Country)
Adjustable transmit power by 1dBm step

Software/Firmware

Site Survey
DHCP Server / Client
Suppressed SSID
Profile Isolation
Station Separation
Spanning Tree settings
Wireless access control by MAC address filter (up to 50 fields)
Multiple SSID with 802.1q VLAN tagging (up to 4 SSIDs)
Web-based configuration via popular browser (MS IE, Netscape…)
Windows “Locator” program to help find IP in DHCP client mode
Firmware upgrade and configuration backup via Web or Telnet
Reset to default by WebUI or by Reset button
VPN pass-through (PPTP, L2TP, IPSEC)
SysLog
SNMP v1/v2c
MIB support: MIB I, MIB II (RFC-1213) and Private MIB
Long distance transmission: up to1~30 Km (ACK timeout)
Support Narrow Bandwidth 5/10/20 MHz adjustable
Support PPPoE(Client Router) mode and PPTP
Ping function and Trace Route function
Support QoS(WMM)
Support Time settings

Operating Environment

Power

Active Ethernet (Power over Ethernet) Proprietary PoE design DC48Volt± 5%; 0.83A (Max.), AC 100~240V

Regulatory Approval

Network Management
System OS Support

Warranty