BacNet Commercial Thermostat

Specifications

1) Typical used in buildings for single zone rooftop units,  split systems, heat pumps or hot/chilled water systems.

2) Designed to provide exceptional temperature control of single & multistage heating and cooling equipment required to reside on BACnet MS/TP networks.

3) A PIC statement is available from the Viconics website to which will provide you with all 45 read/write, and 15 read only BACnet objects many of which can be easily mapped back to a graphical user interface.

4) Self configuring / adjustable baud-rate senses the communication conditions of the current MS/TP network and match them.

5) BACnet PIC statement provided to further facilitate integration.

6) Pre-configured control sequences and rich parameters selectable to meet most applications

7) All setup are permanently held in non-volatile 

memory in the event of a power failure.

8) Attractive turn-cover design, most frequently used  keys are located on the face for quick and easy  access to information. Setup keypads are located on the interior to eliminate accidental setting changes.

9) Large LCD display with enough information for quick and easy readability and operation. Such as measurement and setting temperature, fan and

compressor work status, clock and timer etc.

10) Automatic compressor short cycle protection  

11) Auto or manual fan operation.

12) Auto or manual heat/cool changeover.

13) Include a timer with the auto turning-off

14) Temperature either °F or °C display

15) Set point may be locked out /limited locally or via the network

16) Infrared remote control optional

17) Backlight of LCD optional