Wood Sawdust Dryer Pelletizer Drying and Pelletizing Production line!

Description of Sawdust Dryer:

The sawdust dryer, also known as wood powder dryer, adopts screw conveyor to feed the wet material into the drying drum, sawdust burner (also coal, oil, or gas) to be the heat source, cyclone to collect the dust, draft fan to get the steam and moisture into the air, and electric control cabinet to control the whole system. The sawdust drying system has the advantages of high-degree automation, reasonable process, stable performance, simple operation, wide applicability, etc, and are widely used in drying sawdust, wood chips, wood pellets, straw and other biomass, whose production capacity is as high as 12 tons per hour

Features of Sawdust Dryer:

1. Our sawdust dryer is designed with anti-sticky drum-wall and assembled specially-designed lifters.

2. This rotary drum dryer is divided into secondary-granulating section, balling section, polishing section and drying section, etc.

3. It has big drying capacity, the material well contact with hot air, heat efficiency as high as 60%.

4. Our rotary drum dryer is of low noise, little pollution and good drying effect.

Working principle of Sawdust Dryer:

Sawdust drying system consists of heating device, feeding device, conveying device, discharging device, dust extraction device and other accessory equipment. For the installation process, the rotary drum dryer should slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the rotary drum dryer under gravity. Material to be dried enters the rotary drum dryer, and as the rotary drum dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the rotary drum dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the rotary drum dryer , passing through the hot gas stream as it falls.

 Wood Sawdust Pellet Mill

Introduction of wood pellet mill:

We have two classic designs of the wood pellet mill, in this way, we can choose one most suitable between them as per the material specifications. The machine includes stainless steel screw conveyor, conditioner, and pellet pressing chamber. The pellet mill has advanced overload protection device,  variable frequency speed control device, which control the feeding precisely, and high-quality temperature sensor, to have digital display of temperature and condition the material.

Features of wood pellet mill:

1. Double motor move, soft mode working, even operation, low noise

2. Self-contained water filling device

3. High-intensity cast iron base, more durable.