eps 3d precast concrete hollow core wall panel machine high quality

precast concrete hollow core wall panel machine

1.Introduction of the product line

HOTY Brand 3d-panel product line is a new generation production equipment developed on the basis of introduction,assimilation and innovation in recent years by the company.Its features are as fol-lows:high degree of automation,easy handling,less worker,high fatness,stable quality,replacing variety conveniently,small energy consumption,low maintaining cost and high output

2.Product Parameter

3.Introduction of 3d-Panel

  Be applicable to main wall,enclosure wall,lay and floor slab of the low-rise building as well as the inner flash wall of frame structure building.

Each index of 3d-panel is ensured according to the S-panel shaping plate of TC623-1996 industry standard center.The product features of S-panel are as follows:light material,strong intensity,heat preservation,quake-proof weather-proof,water-proof,fireproof,low cost and easy construction. It can be widely applied to each type of construction project.

4.Products use step

5.A production line with annual 3d-panel output of 400thousand m^2:

1.Floor space :6000m^2

2.Building area no less than 1500m^2.

(1) Height of the main building is no less than 5m,part is 5.8m,length no less than 40m and width no less than 18m.

(2) Height of other production houses is no less than 4m and width is no less than 10m. Working and living houses are 500m^2.

3.Water Distribution: daily water consumption is no less than 20 ton.

4.Power Distribution:160KVA(380V)

5.Steam: (1) pressure>0.7Mpa; (2) air demand : 1t/h

6.Environmental Protection : This project will not produce any waste gas and waste water.

7.Post fixed member

   20 manufacture workers (2 Classes)

8.Main original materials of products

(1) EPS operative nom : China GB10181 (the corresponding British system can be applied)

(2)Steel Wire:2-2.2 operative norm : China GB99972 (the corresponding British system can be applied)

6. graceful bearing