easy to operate and convenient to transport coal and charcoal extruder machine/coal rods machine manufacturers

Specifications

Coal Briquette Extruder Machine 
-Firm structure 
-Profesional factory 
-Durable wearing part 
-Offer guidance and test machine

easy to operate and convenient to transport coal and charcoal extruder machine/coal rods machine manufacturers

characteristics

(1)Coal rods machine use hardened reducer, small size, high load carrying capacity.
(2)Thick internal impeller blade design, impeller and liner using wear-resistant cylinder body made of cast materials, life expectancy increased 4-5 times than ordinary materials.
(3)Coal rods machine head can be replaced by a wear-resistant alloy steel, also easy to replace.
(4)Head and cylinder use splicing forms so it can be opened when the overhaul, replacement of internal impeller and cylinder liner is very convenient.  

Working line

Rotating impeller from the charging port clip coal and put coal forward, coal is gradually compressed into tightly closed particles, while generating relatively large agitation and mixing. 
At this time between the coal particles and between the particles and the blades have a strong simplified friction and shear, while under the action of heat generation, the coal temperature rise, water and binder more uniform, coal plasticity also greatly increased, then after the constraining effect of the cone mold, compressed between the coal particles more closely, and then pressed into a flat mold parts, and molded out from coal bar machine.

Main parameters of  coal briquette extruding machine 

Packaging&shipping

Payment :30% TT in advance, 70%6TT balance pay off before delivery.

Packing: The machine and wear parts will protected by plywooden box or as customers’ will.

Delivery time: For one set, the delivery time is 7-10 days, for 1-5 sets 20-25 days, above 5 sets usually negotiate.

Shipping company: MSK/MSC/APL/EMC/WANHAL/KLINE and We will remind you before boat arrive and offer you all the customs clearance documents on time.

Finally product

 In order to give you the quotation in time,Pls. tell me the answer of the following questions.

1. what's Raw material ? 

2.The moisture and size of raw material ? 

3.Capacity you need ?

4.The shape and size of the final product you prefer?

CONTACT INFORMATION: