DAYI Automatic feed, Enclosed slag,Safe and efficient waste plastic refining equipment, tire pyrolysis plant

The latest series of equipment a few big characteristics:

1, do comprehensive processing of waste plastics, can produce carbon residue and plastic oil at the same time two products.
2, each device is composed of the following systems:

main technology features:

1. The results of key equipment cracking processor adopts horizontal double driving rotational structure, catalytic cracking process and product chemical extraction technology.
2. Equipped with environmental protection equipment is perfect. Such as waste gas burner and strong atomized desulfurization dust removal device.
3. The national patent technology environmental protection new technology of slag.
4. Using the new set of formula of catalyst, solve the product's color and odor.
5. Pure yield efficiency of no less than 80% of waste plastics.
6. This equipment is reasonable design, advanced manufacturing technology, a high degree of automation, security facilities.
7. Wide range of USES, multi-usage.

Refinery processor applicable products and industries:

1. The mixed waste plastics industry, allowing a variety of waste exist at the same time, but suggest that PE > 70%, PVC < 5%.
2. Waste oil. Such as: waste diesel oil, waste oil, waste oil residue and so on.
3. The waste rubber tires.
4. Scrap cable skin (suggested first dechlorination treatment again refining).
5. Oil mud shale oil sludge, oil field oil garbage, etc.
6. Waste PMMA (polymethyl methacrylate) and regeneration.

process:

Don't need to waste plastic to sediment, water, impurities such as iron wire, directly into the high temperature and normal pressure cracking processors, catalytic heating, steam distillate oil, the oil and gas through the condenser, the part can be liquefied, condensate oil to mix, part liquefaction temperature by dealing with the bottom burned gas system input; Mixed oil first join fractionation processor of the cooled heat, through the catalytic reforming process, steam distillate oil, then oil vapor through the condenser, fractionation based fuel oil, through precipitation filtering chemical processing, add various additives, qualified as a fuel oil.

Environment:

In the process of production of "three wastes" treatment.

1. The waste gas

Through safety device water seal fully burning and gas nozzle, eliminates the waste gas pollution, and save a lot of fuel. Soot emissions can adopt independent intellectual property rights of national patent products strong atomization desulfurization dust removal device, carbon can be up to the standards of GB 13271-2001.
2. The waste liquid
Oil in the process, can produce some weak acid wastewater (each 1 ton oil will produce about 50 kilograms of waste water, volume is small, easy to handle). By joining the weak reduction liquid after neutralization, the neutral wastewater after three-stage filtration, after reaching harmless, special to the evaporation of the processor (flue waste heat of the heat source by main processor) evaporation, and more professional wastewater treatment facilities (to the customer selected).

3. The solid waste
After the waste plastics by catalytic pyrolysis, there will be some solid residue, accounts for about 10% by weight of the waste plastics to around 15%. Its main components are coarse carbon black. Can be used as the raw material, production of industrial carbon black can also be used for coal as raw material of thermal power plant auxiliary fuel. Due to the pollution of environmental health at the time of the ash, we adopted the national patent technology of slag.