Airflow coconut shell charcoal carbonization kiln

Technical date for coconut shell charcoal carbonization kiln:

Model: QLTHL1000

Capacity: 1200 kg/10 hours

Power : No need

Size: 5150x1950x2200 mm

Weight: 5000 kg

Inter tank diameter: 1000 mm

Inter tank quantity: 4

Working process of coconut shell charcoal carnonization kiln:

1.Drying stage begins from the ignition for airflow coconut shell charcoal carbonization kiln

After the temperature of furnace rise to 160 ℃ slowly , the water contained in the pay great begin to evaporate rely on the heat, from plus heat and itself great heat produced by combustion.Chemical composition of pay great almost unchanged.

2.Initial phase of carbonization:

This stage mainly depend on the heat from own burning, make coconut shell charcoal carbonization kilntemperature rise to 160 ~ 280 ℃.At this point, the woodiness material come about thermal decomposition reaction, and its composition have started to change.The material of instability, such as the production of hemicellulose decompose substances CO2, CO, and a small amount of acetic acid.

3. Comprehensive coking stage:

This stage, the temperature is 280 ~ 400 ℃, in this phase, the woodiness material rapidly to carry on the thermal decomposition, and generate a large amount of acetic acid, methanol and wood tar and other liquid products.In addition, produce the combustible gases methane, ethylene, the combustible gas to burn in the oven.Thermal decomposition and gas combustion produces a large amount of heat, make the temperature to rise.Woodiness material at high temperature carbonization into charcoal.

     To calcine temperature carbon, in addition to the above three stages, but also make the coking in furnace temperature continues to rise even higher.So, can discharge residual volatile substances in charcoal, improve carbon content in charcoal, make carbon graphite structure increase, enhanced electrical conductivity

  ♥ Before Service:

1. According to our customers special requirements, provide the most suitable project design, process design and the purchase program.

2. Guide customers to choose the best and economical plant, recover investment within short time, and site inspection.

♥ On sale service:

1. Accompany you to check the working conditions of our machines.

2. Inspect the quality of all our machines.

3. Manufacturer the equipments as the contact appears at first time after receive your deposit. Arrange the delivery timely.

♥ After sale service:

1. Send engineers to your site, help you to install and debugging devides, build plant, and training operators, at the same time pass the technology on clay brick production to customers.

2. Guarantee of the equipments quality, maintenance, etc. Solve all the troubles for you timely during your production when receive your call oure-mails.

  Gongyi Lantian mechanical plant was founded in 1989s, which is a company specializing in the production of coal equipment, charcoal equipment, drying equipment, processing equipment, set research and development, production, sale, import and export trade as a whole.

We established of a set of complete service system and experienced service team after 30 years of exploration.Free for customers planning field, flow chart of design and installation, to provide the most professional technical training, and send technicians to guide the field installation and debugging of the equipment.So far, the company has won eight national patents, long-term exchanges and cooperation with overseas countries, won a wide range of international market.