Light Weight Concrete Foaming Agent

1 .  Introduction

Concrete foaming agent  namely the  foaming agent for foamed concrete. It is able to reduce the liquid surface tension, and produce a lot of homogeneous and stable foam to produce the admixtures of foamed concrete.

2.  Property                   

LD foamed concrete is produced by our company cooperating with domestic and foreign experts cooperating with our company by using of the new synthesis, which is the synthesis of polymer materials, non-toxic, tasteless and the PH value closes to neutral. It belongs to a green environment protection material without corrosive to cement and metal and the biodegradation degree above 90%. The high foam expansion, foam stability, the foamed concrete produced no blast bubble, no loose bubble, and the amount and foaming effect are equal to imported plant foaming agent. So, it is the ideal cement foaming agent in the foamed concrete engineering such as the roof insulation heat preservation to find slope, thermal flooring, cast-in-situ wall and so on. LD effective foaming agent with high stability of the bubble capsule shows strong three-dimensional tension and specific tenacity, supporting the foam cement slurry before final set to keep porosity types without bubble and falling when transported by high-pressure pump to the top. 

3. Main Features:

• Strong dispersion, no cluster, flocculation, shrinkage, exudation and sink phenomenon in producing foam concrete. 
• Good stability, thickening property, early strength, foam concrete hole stability, no sink, no collapse, and no shrinkage.
• Good foaming ability, forming the cement solid foam concrete when reacted with cement, low bibulous rate, independent closed hole, no water absorption and storage.

4. Products indicators:

5. Scope of USES: 

The high effective foam agent produced by our company has a widely using. It is a new and ideal building material in this modern time with many functions on itself such as heat insulation, cold, leakproof, shockproof, insulation, gap filling, and thermal insulation and so on. And it has high foaming quantity, high porosity, good flexibility, high bonding strength, environmental protection and energy saving, as well as convenient construction. 

 The main equipment of foam concrete block machine:

Our customer will get a one-stop service:

Pre-sales service: Customers are guided to choose the best applicable products and provided the technology-advanced, energy-saving and practical process. We are responsible for the local planning and design.

Middle-sales Service: Customers are welcome visit our factory for the spot simulation test and propose advices according to contract. We are pleasure to accept them.

After-sales service: Customers are available to get the technology support, including the installation, debugging and operation-training.