High Quality widely used foam concrete Brick Making Machine

LDfoamed concrete is a lightweight concrete derived from portland cement and common portland cement as inorganic cementing material, coal ash as admixture, sand as aggregate, mixed with organic foaming agent. Non-load-bearing walls constructed by cast-in-situ LP foamed concrete has changed the traditional way of building walls with precast concrete segments. The excellent integrity and easy operation means low labour intensity and low building cost. Besides, good strength characteristics with reduced eight, excellent sound and thermal insulation, and water proof, etc., all these performances make it an ideal substitute of present traditional walls.

Specification of brick making machine:

1, Movable type

2, ISO9001,CE

3, Warranty 1year

4, Used for light concrete block

The specific production process of foam concrete machine:

1. Feeding and blend: The quantitative cement, foam agent, steady bubble enhancer is added intothe mixer, through feeding system will be quantitative strengthening agent, foaming agent, stabilizing bubble cement mixer with 30 seconds by dry blend.

2. Mixing: quantitative warm water be added into the mixer with 2 minutes by wet mixing; The quantitative foaming agent be added into the mixer with 8 to 15 seconds mixing.

3. Injection molding and foaming: this material be placed into the mould immediately to foaming with 3-5 minutes.

4. Preliminary maintenance: this process is done by several standing after injection moulding.

5. Demoulding: the foam concrete board can be demould is after initial set, which have the initialstrength.

6. Cutting: this foamed concrete board blank owning a certain intensity can be cut after demoulding, and the cutting specifications can be adjusted according to the need by the cutting blade;

7. Finish product maintenance: the curing time of foam concrete board should have no less than 7 days.

To provide a world best quality of product and service with 100% customer focused. We strive always for honesty and best quality of products and devote ourself to become a foremost seller in foam concrete products, as well as to provide customer focused Products on time with integrity.

Why choose Lead foam concrete brick making machine?

1. The foam blending fast, blowing foam uniformly.

2. Without suspended matter, without the declining, it’s good for steady pouring.

3. Little loss ratio of foam maintain the foam proportion in the foam concrete to make the products with stability density.

4. No dead angle design, mixing the material toughly, storage in its bottom is less than 10mm, no material left on the four walls internal the mixing drum.

5. It could mixing variable materials, such as cement, fly ash, sand pulp, sand stone, perlite, and slag etc.

6. Variable speed mixing and internal structure alteration make its installation easy and mixing frequency high,it saves energy.