Super quality used wood pellet line price with full production line

Super Quality Used Wood Pellet Line Price With Full Production Line

Description of the Wood Pellet Line

Wood Pellet Line is widely used to press all kinds of high-quality biomass material to be solid pellet as burning fuel for fire place or pellet stove, it is specially designed for mass industrial production of wood pellets!

Fanway Wood Pellet Line is a professional manufacture of all kinds of biomass pellet machine especially Wood Pellet Production Plant . It takes use of special feed pellet mill strengthening the driving part, such as, ring die, press roll and hoop. Main drive adopts high accurate gear drive, with an output of 20% higher than belt drive. The Wood Pellet Line contains the high quality bearing and soil seal which ensure high efficient and steady driving with low noise. 

The frequency- conversion speed regulation control strengthening feed conditioner, guarantee quality of the wood pellet. All of our bearing on the Wood Pellet Line are imported NSK, SKF which can ensure the machine has a long working life. The international advanced compensation type flexible coupling is of novel and compact structure, safety, low noise and less trouble. 

Material of the Wood Pellet Line

Process of the Wood Pellet Line

Raw material ---- Wood log debarker ---- Wood Chipper Machine ---- Hammer Mill ---- Wood Pellet Machine ---- Cooling and screening machine ---- Packaging Machine

Wood log, tree branch debarker in the process of Wood Pellet Line

Wood peeling machine is the preferred equipment to replace hand peeling. It can be used to peel various kinds of woods and widely adopted by paper pulp factory, paper mill and other factories. Raw materials for these machine are raw woods of which diameter within 50 to 300mm. Peeling rate of the debarker is 95%, good performance and automatic control system make it to be one of the best machines in the process of Wood Pellet Line !

Wood chipper machine in the process of Wood Pellet Line

Wood chipping is the first step if you want to make wood pellets from logs. According to the structure of working parts, wood chipper is divided into disc wood chipper and drum wood chipper. Drum wood chipper is the ideal equipment for Biomass Pellet Plant with high strength steel, double feeding system, it can be used to process logs, square blocks, branches, forestry waste, and fiber agro waste (such as sugar cane,hemp pole, reed stalks, bamboo, etc.) 
The chip length is different in accordance with the requirements of paper mill, fiber board factory, particleboard industry. BX series drum chippers are the new improved models which have more advantages, such as closer to user, superior performance, etc. All the features show that it is an ideal equipment in the production of Wood Pellet Line !

Wood Hammer Mill in the process of Wood Pellet Line

Size of the material to make pellet should small than 5mm, this series of hammer mill is mainly used for crushing tree branches, wood chips, shavings, straw small wood pieces less than 40mm into sawdust. It adopt direct transmission. The reasonable arrangement of hammers and clearance between hammers and screens make sure the final products are in uniform fineness. The tool bit of the hammer is spray welding with carbon tungsten alloy. The secondary grinding chamber is assembled in this machine. The base has goof rigidity and little vibration. Imported bearing has a high quality. When working, it has low temperature rising. And it is equipped with the temperature indicator that can show the working condition. The bearing pedestal is import brand from Germany. Various thickening screen sieves are selectable. Quick-starting type door opening machinery, make it fast to change the new screen, easy to operate and convenient to maintain.

Dryer in the process of Wood Pellet Line

Rotary drum dryer is your best choice to dry biomass materials of high moistur content and produce high quality biomass fuel. Biomoass materials go through dryer can improve biomass fuel efficiency of 5-15% and lower down emission. It can be used for drying a wide range of biomass materials such as alfalfa, straw, sawdust, marigold, wood shavings, manioc waste, bagasse, colza cake and leaves, etc. Featured by low energy consumption and high drying efficiency, it is widely employed in chemical industry, metallurgy, building and mine digging, etc. The heat efficiency reaches 80% which is much more higher than other drying equipment.

We have single layer dryer, three layers dryer and airflow dryer, three layers dryer is our newest dryer, it is more short than the single layer dryer, convenient for transport, high drying efficiency and better drying effect!

Pellet Mill in the process of Wood Pellet Line

Ring die Wood Pellet Line is widely used to press all kinds of high-quality biomass material to be solid pellet as burning fuel for fire place or pellet stove, it is specially designed for mass industrial production of wood pellets!

Fanway Biomass Pellet Plant is a professional manufacture of all kinds of biomass pellet machine especially Ring die Wood Pellet Machine. It takes use of special feed pellet mill strengthening the driving part, such as, ring die, press roll and hoop. Main drive adopts high accurate gear drive, with an output of 20% higher than belt drive. The Wood Pellet Line contains the high quality bearing and soil seal which ensure high efficient and steady driving with low noise. 

The frequency- conversion speed regulation control strengthening feed conditioner, guarantee quality of the wood pellet. All of our bearing on the Wood Pellet Line are imported NSK, SKF which can ensure the machine has a long working life. The international advanced compensation type flexible coupling is of novel and compact structure, safety, low noise and less trouble. 

Cooling & screening machine in the process of the Wood Pellet Line

The counter flow cooling principle is adopted to cool the pellets with high temperature and moisture. Hot air touches hot pellet cool air touches cool pellets so as to avoid the pellet suiface crack caused by sudden cooling produced by direct touching between cool air and hot pellets. At the same time, the airlock is used for feeding and space of air inlet bigger, therefore it can get better cooling effects, it is an important part in the process of Wood Pellet Line ! 

Parts of the Wood Pellet Line

Inner Structure of the Wood Pellet Line

Finished Biomass pellet

Exported countries

Cutomer visit our Wood Pellet Line

2, Design Wood Pellet Production Line according to your special requirements;

3, Answer your questions and give your detailed explanation timely and effectively;

4, After you confirm the order, if we have the right Biomass Pellet Production Plant in stock, we will arrange delivery immediately. If not, we will arrange production for you at once,

5, Assist to draft the construction scheme and detailed process

6, For the installation, we can sent technical personnel to the scene of the on-the-spot guidance equipment installation, debugging and training operators, if you have any questions for the Wood Pellet Production Line just let me know feel free, by email, phone, whatsapp, wechat etc, we will reply you in shortest time! Fanway Machinery will always together with you and never let you down!

ZHENGZHOU FANWAY MACHINERY MANUFACTURING CO.,LTD is the qualified pellet machinery manufacturer which has devoted in developing, designing and manufacturing top quality Wood Pellet Line . Engineers research and experiment pellet mill and Wood Pellet Line design; skilled labor assembly machines: feed pellet mill, wood pellet mill, fish feed pellet machine, hammer mill, feed mixing machine, sawdust drying machine, fish feed pellets cooling machine, pellets packaging machine, etc. 

Furthermore our experienced and professional Wood Pellet Production Line consultants can offer you turnkey wood pellet plant solution, animal feed pellet plant solution, fish feed pellet plant solution as well as pellets production solution.

A: All kinds of biomass waste, such as sawdust, wood branch, straw, coconut shell……

Any requirements on materials?

A: Ideal size of the raw material should be 1-5mm, ideal moisture of the powder should be 12%-21%

What kind capacity do you have?

A: 500-800kg/hr; 800-1200kg/h; 1200-1500kg/h; 1800-2000kg/hr etc

Can I visit your factory, where is your factory located?

A: Yes, sure, welcome to visit our factory at any time, we are in Zhengzhou city. Henan province, in the middle of China,

About the installation, can you help us to install the Wood Pellet Line ?

A: Yes, sure, we can sent technical personnel to the scene of the on-the-spot guidance equipment installation, debugging and training operators,

Any further question, please be free to contact us by phone, email, whatsapp etc.