Single Stage Single End Suction IH Series Stainless Steel Chemical Pump

Single Stage Single End Suction IH Series Stainless Steel Chemical Pump

Overview about Single Stage Single End Suction IH Series Stainless Steel Chemical Pump

QI model ih stainless steel chemical pump is single-stage end-suction(axial suction) cantilever type centrifugal pump, which is used to transport corrosive liquid with viscosity similar to water and without solid particles. The marked and rated performances and dimensions adopt ISO2858 international standard.

////// PERFORMANCE TABLE LIST \\\ 

Performance table list about Single Stage Single End Suction IH Series Stainless Steel Chemical Pump

////// CONSTRUCTIONS \\\ 

Construction about  Single Stage Single End Suction IH Series Stainless Steel Chemical Pump

FAQ about Single Stage Single End Suction IH Series Stainless Steel Chemical Pump

Tips for Single Stage Single End Suction IH Series Stainless Steel Chemical Pump  installation

Please take note as below when install the pump:

1. The preformed hole on the foundation should be poured as the pump installation drawing.

2. The installation level should meet the demand of the allowed vacuum suction height. The foundation should be in horizontal and stable condition, to make sure the rotation of the driver machinery same with the pump in the direction.

3. When connect by coupling, must make sure the pump and driver shaft center should be in a straight line.

4. If belt connection, the shaft center should be in parallel.

5. The pump suction pipe should be sealed well, and try to less the quantity of the elbow and check valve. When fill water, exhausted the air. It should be no any air when operate. We need to keep the suction pipe slopes up slightly, and then connect with the pump inlet.