Borehole Deep Well High Pressure Multistage Submersible Pump

Borehole Deep Well High Pressure Multistage Submersible Pump

_{×××××××} OVEVERVIEW ^{×××××××}
Overview about Borehole Deep Well High Pressure Multistage Submersible Pump

1.Filled water into motor cavity, tighten and pouring water, vent plug, otherwise it can’t be used.
2.In the electric condition, on land, the Commissioning time(pilot running) time can’t be more than 1 seconds.
3.The electric submersible pump can’t be used when lying or tilt.
4.The pump must be completely submerged into water, but the submerged depth no more than 70 m
5. Wire and cable connection should be operated as rules (the following)

_{×××××××} APPLICATION ^{×××××××}
Application of Borehole Deep Well High Pressure Multistage Submersible Pump

1. Deliver deep well water

2. Irrigation

3. Drink for life

4. Wast water dewatering

_{×××××××} CONSTRUCTION ^{×××××××}
Application of Borehole Deep Well High Pressure Multistage Submersible Pump

ASJ series deep well submersible pump is well directly connecting with diving asynchronous motor, assembles into submersible pumps. It is drive into the well, to extract the effective implement of geothermal water.                                                                                                                                                                               1. Using water lubricated bearings; coupling rigidly coupled to the coupling of the motor use.

2. It works in a motor driven pump impeller rotating centrifugal force, the liquid energy increases, the diversion effect of the pump casing, liquid water pumping.

3. When the deep well pump in the pump top with a check valve to prevent the pump shutdown, Yang who is back in the water, and damage the working parts, affecting the life of the pump.

4. Scuppers while the design of the valve, you can let go of the line of water slowly to prevent winter frost crack pipe.

5. Motor is sealed water-filled motor. Full of water inside the motor for cooling the motor and lubricating the bearings.

6. Upper end of the shaft of the motor is equipped with sand bodies that can effectively prevent water and sediment into the body inside, in order to ensure the use of effects and life of the motor.

7. The main role of the pipe section is coupled pump, lifting it in wells while delivering water to the ground up. Mainly by short pipes, pipe, plywood and other components.

8. Short output tube is connected to water pipes and pumps transition member of.

9. Elbow installed in the wellhead to change the transfer direction of water flow. Plywood is lifting the pump during installation and fixed output line.

_{×××××××} FEATURES ^{×××××××}

Feature about Borehole Deep Well High Pressure Multistage Submersible Pump

Shipping about Borehole Deep Well High Pressure Multistage Submersible Pump