Y series 6pole 0.75KW ac induction cast iron three phase asychronoous electric motor

Y series motor used polygon structure so that the using rate of the stators inner space is very high. The magnet yoke is laminated style, suitable for silicon controlled commutate power supply and it can endure pulsating current and rapid change of current (load change).Magnetic poles are fixed by precise orientation. All the motors of system are with compensate winding, so the reverse performance is very well.

The insulation class of the motor is F, using of reliable insulation structure and nonmenstruum vacuum pressure impregnated, guaranteeing the stable performance of insulation and good heat dissipation.

1.Data listed in the technical data sheet should be employed under the following conditions:     a) Altitude above sea level maximal1,000m;     b) Cooling air temperature maximal 40^oC; Cooling water temperature   maximal 32^oC;     c) The motor can be installed under foul situation, but the right cooling   method of cooling method of cooling and defend class must be chosen. If the situation is special, need humid tropic, please negotiate.     d) The motor is suitable for 3-phase bridge style smoothing reactor, also can adopt power supply of DC generator.     e) The motor accord with GB755 The ration and performance of the   rotating electrical machinery, IEC60034-1 The ration and performance of the rotating electrical machinery and JB/T9577 Technical requirements of Z series middle motor electromotor; 2. The standard rated voltage of the electromotor are 440V, 550V, 660V, 750V etc. Voltage of other classes can also be derived according specific situation, but must be negotiated when ordering. 3. The basic excitation style is separately excited, the excited voltage is 220V, Voltage of other classes can also be derived according specific situation, but must be negotiated when ordering. 4. Short time overload capacity of motor.     Motor can be divided into two kinds according to the use     First kind (A): ordinary industrial DC motor; Second kind (B): metal rolling mill DC motor.     a) First kind (A) motor can endure the overload (1min) according to table 3 .

 

Model	Power (kw)	Rated Current	Speed	Power (Eff%)	Power Factor
Y80M1-2	0.75	1.8	2825	75.0	0.84
Y80M2-2	1.1	2.5	2825	77.0	0.86
Y90S-2	1.5	3.4	2840	78.0	0.85
Y90L-2	2.2	4.8	2842	80.5	0.8
Y100L-2	3	6.4	2880	82.0	0.87
Y112M-2	4	8.2	2890	85.5	0.87
Y132S1-2	5.5	11.1	2900	85.5	0.88
Y132S2-2	7.5	15	2900	86.2	0.88
Y136M1-2	11	21.8	2930	87.2	0.88
Y160M2-2	15	29.4	2930	88.2	0.88
Y160L-2	18.5	35.5	2930	89.0	0.89
Y180M-2	22	42.2	2940	89.0	0.89
Y200L1-2	30	56.9	2950	90.0	0.89
Y80M1-4	0.55	1.5	1390	73.0	0.76
Y80M2-4	0.75	2.0	1390	74.5	0.76
Y90S-4	1.1	2.7	1400	78.0	0.78
Y90L-4	1.5	3.7	1400	79.0	0.79
Y100L1-4	2.2	5.0	1420	81.0	0.82
Y100L2-4	3	6.8	1420	82.5	0.81
Y112M-4	4	8.8	1440	84.5	0.82
Y132S-4	5.5	11.6	1440	85.5	0.84
Y132M-4	7.5	15.4	1440	87.0	0.85
Y160K-4	11	22.6	1460	88.7	0.84
Y160L-4	15	30.3	1460	88.5	0.85
Y180M-4	18.5	35.9	1470	61.0	0.86
Y180L-4	22	42.5	1470	91.5	0.86
Y200L-4	30	56.8	1470	92.2	0.87

 

We can supply the electrical installation dimensions and other details according to your requirements.

 

1-Shaft diameter or length

 

2-Stator height

 

3-Mounting holes size and distance

 

4-Brackets can be either metal or aluminum. Its height can be changed.

 

5-Motor rotation direction can be CW or CCW.

 

6- We can provide a copper wire, aluminumwire or copper-coated aluminum material kernel.

Order Requirement

We will appreciate it a lot if you can offer us your product performance requirements and operation environment, so that we can customize optimal production to meet your every requirement. 1. Air volume 2. Total Pressure or Static Pressure 3. Voltage and Frequency 4. Medium Temperature and Density 5. Altitude of Operation Place