0.8-1.2mm Floor Decking Steel Sheet Painted Corrugated Composite Floor Steel Decking

0.8-1.2mm floor decking steel sheet Painted Corrugated composite floor steel decking
1. MOQ: 1000 m
2. Thickness: 0.8mm-1.2mm
3. Cover width: 688mm
4. Zinc coating(Z80-Z120g/m2

Galvanized metal Floor decking plate

Product introduction:

Floor decking sheet produced by decking forming machine has high strength. It adheres well to concrete. Used on high building, it not only saves steel mould plate, but also reduced the weight of storey. With the same bearing capacity, it economized steel and cuts down investment accordingly.

Products feature:

1. raw material: galvanized steel
2. thickness:0.8-1.2mm
3. quick and easy to install
4. no problem with bad weather conditions during assembly
5. reduce the weight of story
6. longer lasting, thanks to use of high grade steel.

Advantages:

Advanced patterns, complete specifications, acceptable price,and absolute superiority and it is mainly served for multi and high buildings made of steel structure. Major features are listed as follows:

1)      light in weight, high intensity,huge loading capacity as well as good anti-earthquake capacity

2)      simple in construction operation, easy to install

3)      can take place of conventional templates and eliminate the disadvantages of the traditional

4)      can act as a part of the structure of weight bearing, to reduce the cost of material

5)      enable easy operation in reinforecement, wiring, piping floor decking steel sheet is roll formed by roll forming machine, mainly using galvanized steel, at thickness 0.8-1.2mm, simple shape with high rip and high strength.

6)      Put the panel above the welded wire net, fill cement between them